Tripp Lite B051-000-AC Quick Start Manual
  1. Manuals
  2. Brands
  3. Tripp Lite Manuals
  4. Extender
  5. B051-000-AC
  6. Quick start manual
Tripp Lite B051-000-AC Quick Start Manual

Tripp Lite B051-000-AC Quick Start Manual

Ip remote access unit with power control
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
FCC Information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference at his own expense. The user must use shielded
cables and connectors with this equipment. Any changes or modifications to this equipment not expressly approved by Tripp Lite could void
the user's authority to operate this equipment.
RoHS
This product is RoHS compliant.
Package Contents
• B051-000-AC
• 4 ft. USB KVM Cable Kit
• 4 ft. PS/2 KVM Cable Kit
• 10 in. USB/PS2 Combo Console Cable Kit
• 6 ft. USB 2.0 Virtual Media Cable (5-Pin Mini-B Male to A Male)
• 5 ft. External Power Supply
(Input: 100-240V, 50/60Hz, 0.5A Output: 5.3V, 2.4A)
Note: Follow these instructions to ensure proper operation and prevent damage to this device and its connected equipment.
12-176 93-3159_RevC.indd 1
Quick Start Guide
IP Remote Access Unit
with Power Control
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2012 Tripp Lite. All rights reserved. All trademarks are the property of their respective owners.
Model:
B051-000-AC
• 6 ft. C14 to C13 Power Cord
• Rack Mount Bracket
• DIN Rail Brackets
• Rubber Feet
• CD with Software and Owner's Manual
• Quick Start Guide
1
8/27/2012 2:48:14 PM

Advertisement

Table of Contents
loading

Related Manuals for Tripp Lite B051-000-AC

Summary of Contents for Tripp Lite B051-000-AC

  • Page 1 The user must use shielded cables and connectors with this equipment. Any changes or modifications to this equipment not expressly approved by Tripp Lite could void the user’s authority to operate this equipment.

  • Page 2: Supported Browsers

    1280 x 720 with their screen resolution set to 1024 x 768. 1280 x 1024 60, 70, 75, 85 • For best results, a network transfer speed of at least 512 kbps is 1600 x 1200 recommended. Connected Computer/Server Requirements Supported Operating Systems Computers/servers to be connected to the B051-000-AC must have Compatible with all major operating systems. the following: • VGA, SVGA or Multisync port Supported Browsers • For USB Connections: Type A USB port and USB host controller Supported browsers for users that remotely log into the • For PS/2 Connections: 6-pin mini-DIN keyboard and mouse ports B051-000-AC include: Browser Version...

  • Page 3: Hardware Setup

    Hardware Setup General Safety Instructions • Read all of these instructions. Save them for future reference. • Follow all warnings and instructions marked on the device. Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of • the life support equipment or to significantly affect its safety or effectiveness is not recommended. Do not use this equipment in the presence of a flammable anesthetic mixture with air, oxygen or nitrous oxide. • This device is designed for IT power distribution systems with up to 230V phase-to-phase voltage. • Do not place the device on any unstable surface (cart, stand, table, etc.). If the device falls, serious damage will result. • Do not use the device near water. • Do not place the device near, or over, radiators or heat registers. • The device cabinet is provided with slots and openings to permit adequate ventilation. To ensure reliable operation and protect against overheating, these openings must never be blocked or covered. • The device should not be placed on a soft surface (bed, sofa, rug, etc.), as this will block its ventilation openings. Likewise, the device should not be placed in a built-in enclosure unless adequate ventilation has been provided. • Never spill liquid of any kind on the device. • Unplug the device from the wall outlet before cleaning. Use a damp cloth for cleaning. Do not use liquid or aerosol cleaners.

  • Page 4: Rack Mounting Safety Instructions

    • Do not step on or stand on any device when servicing other devices in a rack. Stacking The B051-000-AC can be placed on any level surface that can safely support its weight plus the weight of attached cables. When placing the unit on a desktop, remove the backing material from the rubber feet that came with this package and affix them to the bottom panel at the corners. Note: To ensure adequate ventilation, allow at least 5 cm on each side, and 13 cm at the back for power cord and cable clearance.
  • Page 5 Hardware Setup continued Rack Mounting The B051-000-AC comes with both 0U and DIN rail mounting hardware so that it can be conveniently mounted on a system rack. To mount the unit using the 0U hardware, follow these steps: To mount the unit using the DIN rail hardware, follow these steps: 1. Remove the two screws from the top or bottom of the unit 1. Secure the 0U mounting bracket to the unit by following steps (towards the back panel). 1 and 2 in the previous section. 2. Secure the bracket to the unit using the two screws you just 2. Secure the DIN rail hardware to the 0U hardware using the...

  • Page 6: Administrator Setup

    Administrator Setup First Time Setup Once the B051-000-AC has been installed, the Administrator must prepare the unit for user operation by setting the network parameters and adding users. Network Setup — IP Address Determination If you are an administrator logging in for the first time, you must access the B051-000-AC in order to give it an IP address to which users can connect. You can do this via Web Browser, the IP Installer utility, or the non-browser Windows or Java Client applications. Web Browser By default, the B051-000-AC is set to have its IP address assigned automatically via DHCP server. If it is connected to a network without a DHCP server, it boots with a default IP address. On IPv4...
  • Page 7 7. Click on the Network tab at the top of the screen. From here, a fixed IP address can be assigned in the same way as when using a web browser. (See steps 4 through 8 in the Web Browser section.) 4. If you are on the same network as the B051-000-AC, the client will locate it and display it in the Device List. In this case, highlight the unit in the device list and click the Login button. If you are not on the same network as the unit, it will not be displayed in the list. You must manually enter the IP address in the IP Address...
  • Page 8 Network Setup — IP Address Determination (continued) IP Installer The CD that comes with the product includes a Windows-based IP 2. Select the B051-000-AC from the Device List. Note: If the list Installer utility that can be used to obtain and edit the IP address. is empty, or your device doesn’t appear, click the Enumerate To use the IP Installer utility, the computer you are using must be button to refresh the Device List.
  • Page 9 IP address. For example, to access a B051-000-AC with an b. If you are working on your own computer, install the certificate IP address of 192.168.0.60 and a login string of B051000AC, by following the steps below.
  • Page 10 Java Client applications that allow you to remotely access the a Username and Password. Enter your username and password B051-000-AC and its Admin Utility without using a web browser. as given to you by your system administrator. If you are an The applications function the same, but the Windows Client is...

  • Page 11: Warranty Registration

    WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union) Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, when customers buy new electrical and electronic equipment from Tripp Lite they are entitled to: • Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the country) • Send the new equipment back for recycling when this ultimately becomes waste Tripp Lite follows a policy of continuous improvement. Product specifications are subject to change without notice.
  • Page 12 1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support 12-176 • 93-3159_Rev C 12-176 93-3159_RevC.indd 12 8/27/2012 2:48:20 PM...

Table of Contents