Removing And Refitting The Door Panels; Additional Door Safety - Siemens HK6L00070M Instruction Manual

Attaching the door
Reattach the oven door in the reverse sequence to
removal.
When attaching the oven door, ensure that both
1.
hinges are inserted straight into the opening
(figure A).
The notch on the hinge must engage on both sides
2.
(figure B).
Fold back both locking
3.
levers (figure C). Close the oven door.
:
Warning – Risk of injury!
Risk of injury. If the oven door falls out accidentally or a
hinge snaps shut, do not reach into the hinge. Call the
after­sales service.

Removing and refitting the door panels

The glass panels can be removed from the oven door
to allow more thorough cleaning.
Removal
Removing the oven door See the section
1.
. Lay the oven door on a cloth with the
the oven door
handle facing downwards (Fig. A).
First turn the two screws at the bottom anticlockwise,
2.
then the two screws at the top, also anticlockwise
(Fig. B).
Remove the cover (Fig. C).
3.
The parts that have been removed must not be washed.
Clean the panels with a glass cleaner and a soft cloth.
:
Warning – Risk of injury!
Scratched glass in the appliance door may develop into
a crack. Do not use a glass scraper, sharp or abrasive
cleaning aids or detergents.
Refitting
Place the cover back in position (Fig. A).
1.
First retighten the two screws at the bottom, then the
2.
two screws at the top (Fig. B).
Fitting the oven door See the section
3.
door
Do not use the oven again until the panels have been
correctly fitted.

Additional door safety

When preparing meals with long cooking times, the
oven door can reach very high temperatures.
Removing Supervise small children and keep them away from the
oven when the oven is in operation.
Additional safety devices have been fitted to prevent
contact with the oven door. Always attach these safety
devices when children could come near the oven.
You can purchase this optional accessory (11023590)
from the after-sales service.
.
Appliance door
en
Fitting the oven
21