Table of Contents
Advertisement
Headset indicator light
If you are not on a call, you can toggle the headset in-use
indicator light on and off by pressing the headset volume down
button (press volume up for left ear configuration) for three
seconds.
Subscribing a headset
The headset and USB adapter that are supplied together are
already subscribed to each other. However, if you wish to use
a new headset with your existing USB adapter or you need to
restore subscription to your current headset, the units can be
subscribed to each other by the following method:
1
Ensure your headset is charged.
2
Double press the subscription button on the USB
adapter. The USB adapter will flash red and green.
3
Press the volume up button (press volume down for left
ear configuration) on the headset for three seconds until
the headset indicator light turns solid white.
4
When the indicator light on the USB adapter goes solid
green, the headset and the USB adapter are subscribed
to one another.
Plantronics Savi User Guide
To ensure subscription was successful, press the call control
button: the headset will flash white and the USB adapter will
flash green.
NOTE
If the subscription process times out after two minutes
or if the subscription process fails, the USB adapter indicator
light will become solid red for four seconds and then return to
its previous state. If this occurs, try to re-subscribe the headset
again.
Ending subscription
If the USB adapter is in subscription mode and you want to stop
the adapter from searching for a headset, press the subscription
button again. The subscription light will turn solid red for four
seconds and then go to its previous state.
12
Advertisement
Table of Contents
