Table of Contents
Advertisement
SELECT
16 | Operation
Backlighting
The backlighting is adjusted by pressing the Light key
when the instrument is in normal operation.
Current light setting will be indicated with the right LED
digit.
The light setting affects the diodes, the digital display
and the backlight as shown in the table:
LIGHT LEVEL
0
1-7
8
9
Level 8 and 9 are for bright daylight.
The instrument will return to normal operation 1 second
after the last key press.
Range: 0 - 9
If several instruments are connected via SimNet,
the instruments can be grouped in different light
banks. Changing the backlight settings on one of the
instruments will affect all instruments in the group. Refer
to Light bank selection in Changing the default settings
chapter.
Error Alarm
In the event the error indicator
instrument is not operable and service/repair is
required.
DIODES AND DISPLAY
Low
Steps
Medium
High
Default value: 2
BACKLIGHT
Off
Steps
Off
Off
is lit, the
Advertisement
Table of Contents
