Philips 32PF9968/10 Service Manual page 8

EN 8 4.
4.3.2 Side AV Assy/Panel Removal
Figure 4-4 Side AV assy/panel removal
Remove the IO bracket by pulling the fixation clamp [1] while
sliding it away from the front side.
4.3.3 Trident Assy/Panel Removal
4
2
1
Figure 4-5 Trident assy/panel removal
Figure 4-6 Trident assy
L04A AD Mechanical Instructions
E_14770_041.eps
E_14770_042.eps
3
E_14770_043.eps
1. Remove screw [1] at the bottom of the Trident bracket.
2. To remove bracket pull both fixation clamps [2] while lifting
at the opposite side near the heatsink [3].
3. To remove shielding bracket push fixation clamps [4] and
pull at the top.
4. To remove the Trident assy from the remaining bracket
release the two fixation clamps [5] (see Trident assy)
4.4 Set Re-assembly
To re-assemble the whole set, do all processes in reverse
order.
Note: before you mount the rear cover, perform the following
checks:
1. Check whether the AC power cord is mounted correctly in
its guiding brackets.
010904
2. Check whether all cables are replaced in their original
position.
3
010904
010904