Homewhiz Setup And User Account Settings - Blomberg DWT 81900 FBI User Manual

HomeWhiz Function
You can check your dishwasher and
learn about its status via your smart
device with the HomeWhiz function.
C
You can use your machine
via your smart device while
the function is selected. You
can monitor your machine
through the application when
the function is not selected.
C
You can check the indicator
on the product to see if the
function is enabled or not.
If the function is disabled,
the Wi-Fi indicator will be off
or continuously flash at short
intervals. For example, when
the wireless connection
setting is off or the door of
the machine is open.
C
The function will be disabled
when the door of the
dishwasher is open or when
operations regarding On/
Off are performed on the
machine. It can be enabled
again with the remote control
key.
The display when HomeWhiz is
enabled.
HOMEWHIZ SETUP AND
USER ACCOUNT SETTINGS
Install the HomeWhiz application from
the application store of your smart
device to use the WLAN function of
your machine. Make sure that your
smart device is connected to the
internet to use the application.
If you are using the application for the
first time, complete the registration
process with your e-mail address on
the application. Once you've completed
the registration process, you can use
all HomeWhiz supported appliances in
your house through this account.
You can tap "Add/Remove Appliance"
under the "Appliances" section to
see the appliances paired with your
account. You can perform the user
pairing processes of these appliances
from this page.
Initial setup
1 Tap "Add/Remove Appliance"
section on the HomeWhiz
application.
2 Tap "Tap here to setup a new
appliance".
3. When the product is off, press
the on/off and remote start keys
simultaneously to enter the settings
menu. Press the selection key
to set the product to "wireless
connection setup" status.
4. Then, in the settings section of
your smart device, connect to
"HomeWhiz xxx-xxxx" network
under the Wi-Fi settings. Password
of the network can be seen on the
HomeWhiz application.
5. Connect your smart device to the
HomeWhiz network and return to
the HomeWhiz application. On
the application, you can see the
dishwasher you are adding. Tap
Next to proceed to the next step.
6. Select the network to which you
want to connect your dishwasher
and enter the password.
24
USA