Table of Contents
Advertisement
installation may cause skipping or
other malfunctions.
When not using the supplied
mounting sleeve
1
Line up the holes on the mounting
bracket with the holes on the sides
of the unit to attach the bracket.
2
Screw in one screw on each side to
hold the unit in place.
Truss screw (5 mm × 9 mm)
Mounting bracket
Dashboard or console
Using the included bracket
Check to make sure that the included
bracket matches your particular model
of vehicle and then attach it to the unit
as shown below.
14
En
Screw
Bracket
Removing the unit (installed
with the supplied mounting
sleeve)
1
Remove the trim ring.
Trim ring
Notched tab
• Releasing the front panel allows
easier access to the trim ring.
• When reattaching the trim ring,
point the side with the notched
tab down.
2
Insert the supplied extraction keys
into both sides of the unit until
they click into place.
3
Pull the unit out of the dashboard.
Advertisement
Table of Contents
