Overloading Protection - Panasonic MX-XP101 Operating Instructions Manual

Problem
sing
r
The mxiture is
twist
leaking.
Lubrication oil might be traced around the upper connector (P.EN7) but it will not
●
affect the performance. Wipe them off with kitchen paper.
"Peep" sound may be heard during operation, but it is not abnormal.
●

Overloading Protection

ove
In the case of overload, the protection device is triggered to stop operation and it
is not abnormal. After rotation stops, take the following steps.
Do not operate the appliance repeatedly without any countermeasure. (Cause of
●
smoking, unpleasant smell or malfunction)
1
2
EN15)
mount.
3
(Contact Service Centre for inspection or repair if it still does not operate normally.)
The tumbler unit is not assembled firmly.
●
➡ Assemble it firmly. (P. EN8)
The lid gasket or tumbler base gasket is not attached
●
firmly.
➡ Attach it them properly.
▶
Foreign matters are adhered around the lid gasket or
●
tumbler base gasket.
➡ Remove the foreign matters.
The tumbler base gasket is damaged.
●
➡ Replace it.
Twist tumbler back to "OFF" direction,
remove it from motor housing.
Reduce the ingredients in tumbler to half
Remove the prohibited ingredients if it is used.
●
When the blade is stuck with ice cubes, remove it from the tumbler,
●
for the caught one around the blade, remove it by flushing water.
For smoothie etc. with high viscosity or low moisture, reduce the
●
ingredients and add more liquid.
Rest the appliance for more than 1 minute.
●
Reset the tumbler, start blending again.
Cause and Action
EN15