Cleaning And Care - Panasonic MX-XP101 Operating Instructions Manual

Tumbler blender
Table of Contents

Advertisement

Cleaning and Care

After prewash, unplug the appliance before cleaning.
Make sure to clean the appliance after every use.
Do not use benzine, thinner, bleach, alcohol, nylon face of sponge, metal brushes or polish
powder etc.
Some discoloration of plastic parts may occur upon usage but it does not affect usage.
Use a thin and round top stick which fit into the cutout part on the tumbler base or lid to pick
up and put back its gasket. (e.g. chopstick)
Prewash
Soak in warm water with diluted kitchen detergent first,
then clean it with a soft sponge. Rinse and dry them
well.
● For cleaning tumbler, the sponge with long and thin
handle is recommended. Clean the edge of tumbler
thoroughly.
●Do not use hot water above 40℃ .
●Remove the lid gasket before cleaning.
(Dry it well, and put it back along the inboard edge of
the lid.)
Lid gasket
Clean the tumbler base especially the blade and its
surrounding with a brush under running water.
(Brush is not provided.)
● D o not clean the blade with bare hand.
● D o not use hot water above 40℃ .
Wipe with a damped cloth.
Storing
●Dry the tumbler base thoroughly, then assemble the
tumbler.
●Dry the lid thoroughly, then keep it separately.
EN12
Before cleaning, add 400 mL water and blend for about 1 minute.
Taking out from here

Advertisement

Chapters

Table of Contents
loading

Table of Contents