Dual XRM69RGB Installation & Owner's Manual page 8

XRM69RGB OPERATION
RGB Color Operation
Dimmer Press DIM to adjust the dimmer level for the buttons and
LCD, and turn the volume knob left or right to select
HIGH (default)/MID/LOW.
Quick Preset Color Press the volume knob while the dimmer level is being
displayed to select one of 7 preset colors.
Setting the Color Mode Press and hold the volume knob for more than two
seconds to enter the color setting menu. Turn the
volume knob left and right to select Color Auto (default)/
Preset/Custom/Flash mode. Press and hold the volume
knob for more than 2 seconds again to enter each color
mode.
Auto Color Set the unit to rotate between all illumination colors
automatically.
Preset Color Select one of the 7 colors (Blue/Green/Red/Yellow/Violet/
Cyan/White).
Custom Color Adjust each red, green and blue in the range of 0-32 to
customize your colors for over 32K combination.
Note: Adjusting each red, green and blue level to 0 will
turn off all the lights on the LCD and buttons. To turn the
lights back, press DIM and change the color again in the
color setting.
Flash Color Select one out of six different color and flash effect
lights or turn it off. Flash lights will be demonstrated
for about 30 seconds, and back to setting mode. The
adjusted color will be flashed when there is an incoming
Bluetooth call.
8