Acer XZ272 User Manual page 26

Adjusting the Picture
Picture
Brightness
Color Contrast
Audio
Blue Light
Black Boost
Gaming
ACM
OSD
HDR
System
Super Sharpness
1. Brightness: Adjust the brightness from 0 to 100.
Note: Adjusts the balance between light and dark shades.
2. Contrast: adjust the contrast from 0 to 100.
Note: Sets the degree of difference between light and dark areas.
3. Blue Light: filter out blue light by adjusting different Blue Light showing
ratio - 80%, 70%, 60%, 50%.
Note: Higher values allow more blue light through. For the best
protection, select a lower value.
4. Black Boost: This boosts the amplitude of the dark color levels of the
display— blacks will be less black. The higher the level, the higher the
boost.
5. ACM: Turn ACM on or off. The default is off.
6. HDR: Turn HDR Off, Auto or HDR. The default is Off. Select Auto
enables this function to automatically detect and process HDR signal.
Note:
1. If HDR is "Auto", then Modes is set to "HDR" automatically.
2. If HDR is "Auto", certain parameters (ACM, Gamma, Contrast,
Blue Light, Color Temperature, Black Boost, Grayscale Mode,
6-axis Hue, 6-axis Saturate, and VRB/TVR) are grayed out and
disabled.
3. HDR function is only available for HDMI 2.0. or DP.
7. Super Sharpness technology can simulate high-resolution images by
boosting the pixel density of the original source. It can make images
sharper and clear.
Mode - Standard
80
50
5
16