User Controls - Acer XZ272 User Manual

USER CONTROLS

Base Controls
Note: The location and names of the function buttons and power button on
the monitor may vary according to monitor model, and some button may not
available for some models.
Type 1
Type 2
Type 3-1
Type 3-2
No.
1 Go to the main menu.
2 Enter the source mode.
3/4 HotKey 1, 2 buttons. Press to activate user defined hotkey
function.
5 In the powered-off state, pressing the button powers on the
device; in the powered-on state, pressing the button normally
enters the mode switching menu, and long- pressing for
3 seconds powers off the device.
No.
1 Enter the mode switching menu.
2 Enter brightness adjustment.
3 Enter the source mode.
4 Go to the main menu.
5 Power on/off.
No. Item
Power button/
1
indicator
Hotkey 1, 2
2
buttons
3 Input button
4 Navi/OK button
No. Item
Menu/Navi/OK
1
button
Description
Description
Turns the monitor on/off. Blue indicates
power on. Amber indicates standby/power
saving mode.
Press to activate user defined hotkey
function.
Press to toggle input sources.
Press to activate the OSD menu, then use
it as directional key to highlight the desired
function.
Press it again to enter a selection.
Power on/Long press to Power off.
Enter the main menu, Select/Adjust menu
options.
12
Description
Description