3
Calibrations
Calibrations have to be done if Exchange Board or PBA
complete Sub (with Accelerometer and Gyroscope
components) is replaced.
3.1
Gyroscope
Make sure you place the phone on a level surface by
putting an air level on the window.
• In the Service menu, press Calibrations
• Press Gyroscope
• Press Calibration
Press Back key to return to Service Test Menu.
3.2
Accelerometer
Make sure you place it on a level surface by putting an
air level on the window.
• In the Service menu, press Calibrations
• Press Accelerometer
• Press Calibration
Press Back key to return to Service Test Menu.
3.3
Proximity Sensor
N/A
1277-9815 Rev 3
Sony Mobile Communications AB – Company Internal
Test Instructions (mech)
Only symbolic view
31(32)