Jensen MS3ARTL Owner's Manual page 11

Pairing a Bluetooth Device
Before you begin, consult the owner's manual for the Bluetooth device you want to pair with the MS30BT.
Make sure the device is on and ready to receive a signal from the MS30BT. With the MS30BT in "BT MODE", press and
1.
hold the MODE (8) button.
Repeatedly press MODE until the unit displays PAIR ON, then press ||/MUTE. The unit will display PAIR and count down
2.
from 120 to 0. While the unit counts down, use your mobile device Bluetooth function to search for a Bluetooth device.
3. When your mobile device has completed its search, the mobile device will display the Bluetooth device name (MS30BT).
4. Select MS30BT. Once connected the Bluetooth Audio icon (
5. Enter the pairing password (0000), if requested.
After connecting successfully, you will be able to listen to audio stored on your Bluetooth enabled device through the radio.
Answering a Call
When answering a call using the connected phone, Bluetooth audio playback will pause. After hanging up from the call,
Bluetooth audio will continue on some phones. It may be necessary to press the play button to resume Bluetooth audio
playback.
Bluetooth Audio (A2DP)
Selecting Tracks
During playback, press |<< (6) or >>| (7) to play the previous or next track.
Pausing Playback
During playback, press ||/MUTE (9) to pause the Bluetooth audio playback. "BT PAUSE" will appear on the LCD. Press
||/MUTE again to resume playback. If you change to another mode, playback will automatically pause. Press the MODE button
(8) to return to Bluetooth mode and resume audio playback from your Bluetooth enabled device.
NOTE: If a Bluetooth device is disconnected due to the power being turned off or if the device goes out of range, the
unit will automatically search for the matching Bluetooth mobile device when the power is restored.
) will appear on the radio LCD display.
9
MS30BT