Texas Instruments INA234EVM User Manual page 8

Operation
a. For first-time GUI Composer setup, follow the prompts to download the TI Cloud Agent and browser
extension shown in
4. Optionally, the GUI can be downloaded for offline use by clicking the
application (shown in
4.2.1.3.2 GUI Operation
To operate the GUI, follow these steps:
1. Connect to and launch the GUI as described in
2. With the EVM connected to the GUI, close the README.md file page to initiate the connection. If successful,
the Hardware Connected message should be visible near the bottom-left corner of the GUI as in
a. A green indicator with the device type and the text DEVICE CONNECTED should also be visible near
the top-left of the GUI window, as shown in
b. If Hardware Connected and DEVICE CONNECTED do not show in the GUI, check the different
hardware COM ports under Options >> Serial Port, as shown in
c. If the hardware still does not connect, make sure you are using the correct GUI/EVM combination.
8 INA234EVM and INA236EVM
Figure 4-5. These prompts will appear after you close the README.md dialog.
Figure 4-5. TI Cloud Agent
Figure 4-4) and following the prompts.
Figure 4-6. Hardware Connected
Figure 4-7. Device Connected
Figure 4-8. Change Serial Port
Copyright © 2021 Texas Instruments Incorporated
icon in the GUI Composer
Section 4.2.1.3.1.
Figure 4-7.
Figure
www.ti.com
Figure
4-8.
SBOU264 – MAY 2021
Submit Document Feedback
4-6.