MSI MS-6323 Manual page 24

CHAPTER 2
2.17 Wake-Up on LAN Connector: JWOL1
The JWOL1 connector is for use with LAN add-on cards that supports
Wake Up on LAN function. To use this function, you need to set the
"Wake-Up on LAN" to enable at the BIOS Power Management Setup.
3
JWOL1
Note: LAN wake-up signal is active "high".
Note: To be able to use this function, you need a power supply that
provide enough power for this feature. (Power supply with 750ma
5V Stand-by)
1
PIN
1
2
3
2-20
HARDWARE INSTALLATION
SIGNAL
5VSB
GND
MP_WAKEUP