Specifications - Technics SL-1200M3D Service Manual

• •
Direct Drive Turntable System

Specifications

••
General
Power supply: AC 120V, 60Hz
Power consumption: 14W
Dimensions (WxHxD): 453 x 162 x 353 mm
(17-27/32" x 6-12/32" x 13-29/32")
12 kg (26.4 lb.)
Weight:
Turntable section
Quarts direct drive
Type:
Manual turntable
Direct drive
Drive method:
Brushless DC motor
Motor:
Aluminum diecast
Turntable platter:
Diameter 332 mm (13-5/64")
Weight 1.7 kg (3.74 lb.)
33-1/3 rpm snd 45 rpm
Turntable speeds:
1.5 kg-cm (1.3 lb-in)
Starting torque:
0.7s.ffrrom standstill to 33-1/3 rpm
Build-up characteristics:
Electronic brake
Braking system:
0.01% W.R.M.S.*
Wow and flutter:
0.025% W.R.M.S.(JIS C5521)
±0.035% peak (IEC 98A Weighted)
–56 dB (IEC 98A Unweighted)
Rumble:
–78 dB (IEC 98A Weighted)
*This rating refers to turntable assembly alone, excluding effects
of record, cartridge or tonearm, but including platter.Measured by
obtaining signal from built-in frequency generator of motor as
sembly.
This service information is designed for experienced repair technicians only and is not designed for use by the general public. It does not
contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product.
Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any attempt to service or
repair the product or products dealt with in this service information by anyone else could result in serious injury or death.
• •
SL-1200M3D
Tonearm section
Type:
Effective lenghth:
Arm height adjustment
range:
Overhang:
Effective mass:
Offset angle:
Friction:
Tracking error angle:
Stylus pressure
adjustment range:
Applicable cartridge
weight range:
(with auxiliary weight);
(with shell weight);
Headshell weight:
Note:
Specifications are subject to change without notice.
Weight and dimensions are approximate.
WARNING
!
. 1 .
ORDER NO. AD9903091C1
A2
Turntable System
Colour
(S)............Silver Type
Areas
(P)............U.S.A.
(PC)..........Canada.
Universal
230 mm (9-1/16")
0 – 6 mm
15 mm (19/32")
12 g (without cartridge)
22°
Less than 7 mg (lateral, vertical)
Within 2°32' (at the outer groove
of 30 cm <12"> record)
Within 0°32' (at the inner groove
of 30 cm <12"> record)
0 – 4 g
11 – 20.5 g (including headshell)
9.5 – 13 g
17 – 20.5 g (including headshell)
3.5 – 6.5 g
11 – 14 g (including headshell)
7.5 g
©
1999 Matsushita Electric Industrial Co., Ltd.
All rights reserved. Unauthorized copying
and distribution is a violation of law.
SL-1200M3D