Table of Contents
Advertisement
S
PECIFICATIONS
MODEL ----------------------------------------------------- HC-233, HC-234
Length (HC-233) ------------------------------------------- 1,105 mm (43.5 in.)
Length (HC-234) ------------------------------------------- 1,350 mm (50.8 in.)
Width -------------------------------------------------------- 270 mm (10.6 in.)
Height ------------------------------------------------------- 225 mm (8.86 in.)
Weight, dry (HC-233) ------------------------------------- 5.85 kg (12.9 lb.)
Weight, dry (HC-234) ------------------------------------- 6.32 kg (13.9 lb.)
Type of Engine --------------------------------------------- Air cooled, two-stroke, single cylinder, gasoline engine
Displacement ----------------------------------------------- 22.8 cc (1.39 cu.in.)
Bore ---------------------------------------------------------- 32.2 mm (1.96 in.)
Stroke -------------------------------------------------------- 28.0 mm (1.71 in.)
Exhaust System -------------------------------------------- Spark Arrestor Muffler w/catalyst
Carburetor -------------------------------------------------- Walbro diaphragm model w/primer pump
Ignition System -------------------------------------------- Flywheel Magneto, Capacitor discharge ignition
Spark Plug -------------------------------------------------- NGK BPM-8Y (Gap 0.65 mm (0.026 in.)
Fuel ---------------------------------------------------------- Mixed Fuel - gasoline and oil
Fuel/Oil Ratio ----------------------------------------------- 50:1 two-stroke air cooled engine oil
Gasoline ----------------------------------------------------- 89 Octane unleaded. DO NOT use fuel containing methyl alcohol,
Oil ------------------------------------------------------------ Power Blend
Fuel Tank Capacity ---------------------------------------- 0.55 lit. (18.6 fl. oz)
Starter System ---------------------------------------------- Automatic Recoil Starter
Clutch ------------------------------------------------------- Centrifugal Type
Gear Case Ratio -------------------------------------------- 4.667:1
Cutter Bar --------------------------------------------------- Single Edge
Length (HC-233) ----------------------------------------- 752 mm (29.6 in.)
Length (HC-234) ----------------------------------------- 996 mm (39.2 in)
Pitch ------------------------------------------------------- 35 mm (1.4 in.)
Height ----------------------------------------------------- 23 mm (0.91 in.)
Maximum Diameter Cut
Soft Material ---------------------------------------------- 25.4 mm (1 in.)
Woody Material ------------------------------------------ 13 mm (1/2 in.)
Idle Speed (RPM) ------------------------------------------ 2,750 - 3,250
Wide Open Throttle (RPM) ------------------------------- 9,500 - 11,000
O
more than 10% ethyl alcohol or 15% MTBE.
TM
Premium Universal 2-Stroke Oil
H
C
EDGE
LIPPER
'
M
PERATOR
S
ANUAL
25
Advertisement
Table of Contents
