TRENDnet TEW-811DRU User Manual page 34

Hide thumbs Also See for TEW-811DRU:

Table of Contents

QoS Setting

There are several Maximum upload bandwidth to choose or user defined. QoS is enabled by default. You

can disable it in the QoS Setup screen by clearing the Enable check box

Traffic Class Setting

User could

select the Low/Mid/highest priority that this port's traffic should receive relative to other

applications and traffic when accessing the Internet.

Inbound class Setting

For user to limit downlink bandwidth

Outbound Class Setting

For user to limit Min/Max uplink bandwidth

QoS Rule Add

User could select either TCP, UDP, or both (TCP/UDP), and specify the port number or range of port

numbers used. User could set priority and limitation by IP/MAC address, Protocol or Port.

QoS List

You can setup QoS per different protocol Application.

Table of Contents