Table of Contents
Advertisement
SET UP & USE
SET UP & USE
• If you want to use the TARE function, press the POWER/TARE button to clear the results of the
container/storage item just measured, the display will show "0 g", "0 ml", "0.0 fl.oz" or "0:00
lb/oz" depending on the unit of measure you have selected.
lb:oz
weight unit
lb:oz
weight unit
lb:oz
fl'oz
weight unit
volume unit
fl'oz
volume unit
• Then, place the next food or liquid you wish to measure into the container and the
fl'oz
measurement that was added will be displayed. This step can be repeated to get individual
fl'oz
volume unit
measurements of added items.
fl'oz
• Press the tare button again and when the container with the food or liquid is removed from the
platform, the total measurement of food or liquid and the container will be shown with a "-"
symbol in front of it. Press the POWER/TARE button and the display will return to "0".
fl'oz
NOTE: After your last TARE function request and the contents have been removed from the
platform, the unit shuts off automatically after approximately 2 minutes. You can power
off sooner by holding POWER/TARE button down for approximately two seconds.
ERROR INDICATORS
• Change battery when "Lo" appears on the LCD which indicates that the battery is running out
of power.
• "Err" showing on LCD indicates overload, surpassing the 11 pound weight limit of this product.
• "unSt" showing on the LCD indicates that the scale is not stable enough to produce an accurate
reading. Relocate scale on to a more stable base and try again.
•
Will occur if more than 4.4 lbs (2kg) of weight is placed on the scale before power has been
turned on. To clear error code, remove items from the scale and wait 3 seconds before
resuming use.
Page 6
unit
g
3 seconds
weight unit
unit
T
g
ml
3 seconds
T
volume unit
g
unit
T
g
ml
3 seconds
g
g
g
38
g
T
g
lb:oz
fl'oz
ml
38
g
LCD full screen display
38
g
g
lb:oz
weight unit
fl'oz
volume unit
fl'oz
T
g
g
38
g
Advertisement
Table of Contents
