Related Manuals for Star Micronics AirPrint
Summary of Contents for Star Micronics AirPrint
- Page 1 AirPrint Users Manual Revision 1.3 Star Micronics Corporation Special Devices Division 1 / 20 © 2010-2021 Star Micronics Co., Ltd.
-
Page 2: Table Of Contents
Please select HIA Printer....................18 3.1.5 Please click "Print", then you can get print out..............18 Trouble shooting ..........................19 How to initialize Ethernet settings to factory default settings..........19 2 / 20 © 2010-2021 Star Micronics Co., Ltd. -
Page 3: Introduction
1 Introduction AirPrint is a feature in Apple Inc.'s macOS and iOS operating systems such as iPhone, iPad and iPod touch for printing via a WLAN (Wireless LAN). With AirPrint, it is easy to print photos and documents from your Mac, iPhone, iPad, or iPod touch without having to install additional software. -
Page 4: Setting
2.4GHz 1.9.3 or higher D-Link DWA-182 HW Ver.D1 2.4GHz / 5GHz 1.9.3 or higher ASUS USB-AC53 Nano 2.4GHz / 5GHz 1.9.3 or higher D-Link DWA-131 HW Ver.E1 2.4GHz 1.9.3 or higher 4 / 20 © 2010-2021 Star Micronics Co., Ltd. -
Page 5: How To Setup Wired Lan
IP Address :xxx.xxx.xxx.xxx ( ※ Protocol) Subnet Mask :xxx.xxx.xxx.xxx Default Gateway :xxx.xxx.xxx.xxx 2.2.3 Execute Browser, then Login Put IP address of IFBD-HI01X/02X into the web-browser. Then the web configuration utility is shown. 5 / 20 © 2010-2021 Star Micronics Co., Ltd. - Page 6 (These has been indicated under “Login”) After Login, if login password for root is default, then “Change Password” contents show. Please input new password and click submit. If submit is succeeded, then go next step. 6 / 20 © 2010-2021 Star Micronics Co., Ltd.
-
Page 7: Ip Config Settings
If setting Static to anything other than 0.0.0.0, set all Dynamic to DISABLE. If setting Dynamic to ENABLE, set all Static to 0.0.0.0. After change the settings, please click “submit” and save the settings. 7 / 20 © 2010-2021 Star Micronics Co., Ltd. -
Page 8: Airprint Settings
2.2.5 AirPrint Settings This is settings for AirPrint. If you need to change below settings, please change them, then save the settings. [ Example of setting list ] (*1) Default value (*2) If "Get Browser Location" button cannot work, please see following examples or set "SSL" setting and open by "https". -
Page 9: Peripheral (Dk Port) Settings
Peripheral (DK Port) Settings This is setting for Cash Drawer and Buzzer control for AirPrint, it can be changed at "System Configuration" on the menu list. Refer to the below settings, then submit and save the settings. 9 / 20... -
Page 10: How To Setup Wlan
- Turn on the IFBD-HI01X/02X - Printer with pushing the feed button for 5 seconds. - The IP address of the IFBD-HI01X/02X - Printer is shown in 2nd print paper. Ethernet Network: IP Address :xxx.xxx.xxx.xxx ( Protocol) ※ Subnet Mask :xxx.xxx.xxx.xxx Default Gateway :xxx.xxx.xxx.xxx 10 / 20 © 2010-2021 Star Micronics Co., Ltd. -
Page 11: Execute Browser, Then Login
Put IP address of IFBD-HI01X/02X into the web-browser. Then the web configuration utility is shown. To enter the setting of HI01X/02X page, click “Login” and put user name and password. User name: “root”, Password: ”public” as factory setting. (These has been indicated under “Login”) 11 / 20 © 2010-2021 Star Micronics Co., Ltd. - Page 12 After Login, if login password for root is default, then “Change Password” contents show. Please input new password and click submit. If submit is succeeded, then go next step. 12 / 20 © 2010-2021 Star Micronics Co., Ltd.
-
Page 13: Wireless Connection Settings
2.3.4 Wireless Connection Settings There are two kinds of settings to connect to Access Point, one is Site Survey and another is Manual Connect. 13 / 20 © 2010-2021 Star Micronics Co., Ltd. -
Page 14: Wlan Ip Config
If setting Static to anything other than 0.0.0.0, set all Dynamic to DISABLE. If setting Dynamic to ENABLE, set all Static to 0.0.0.0. After change the settings, please click “submit” and save the settings. 14 / 20 © 2010-2021 Star Micronics Co., Ltd. -
Page 15: Airprint Settings
2.3.6 AirPrint Settings This is settings for AirPrint. If you need to change below settings, please change them, then save the settings. [ Example of setting list ] (*1) Default value (*2) If "Get Browser Location" button cannot work, please see following examples or set "SSL" setting and open by "https". -
Page 16: Peripheral (Dk Port) Settings
2.3.7 Peripheral (DK Port) Settings This is setting for Cash Drawer and Buzzer control for AirPrint, it can be changed at "System Configuration" on the menu list. Refer to the below settings, then submit and save the settings. 16 / 20... -
Page 17: Printing
3 Printing 3.1 How to Print *In case of printing photos 3.1.1 Please select "Photos", then select picture(s) 3.1.2 Please select "Print". 17 / 20 © 2010-2021 Star Micronics Co., Ltd. -
Page 18: Please Select "Printer
3.1.3 Please select "Printer”. 3.1.4 Please select “HIA Printer”. 3.1.5 Please click "Print", then you can get print out. 18 / 20 © 2010-2021 Star Micronics Co., Ltd. -
Page 19: Trouble Shooting
Note: When turning the power on, a different mode (automatic firmware update function using TFTP client) will startup that is different to the above functions, for the operations when turning the power on with the push switch pressed. 19 / 20 © 2010-2021 Star Micronics Co., Ltd. - Page 20 20 / 20 © 2010-2021 Star Micronics Co., Ltd.