Reset; Switching Off/Restarting The Primebook; Useful Tips On Saving Energy - TrekStor PRIMEBOOK P14B Operating Instructions Manual

Table of Contents

Advertisement

23. Reset

If the Primebook "freezes" and no longer responds, you can reset it. Press and
hold down the on/off switch for at least 10 seconds until the device switches
off. Wait for about 20 seconds and then turn the device on normally.
i
ADVICE
Any files that have not been saved will be lost when the Primebook is reset.

24. Switching off/Restarting the Primebook

Briefly press the on/off switch on the device to activate the standby mode.
Press it again quickly to take the Primebook out of standby mode.
Proceed as follows to restart the Primebook:
a)
Open the Start menu by clicking the Windows icon on the bottom left of
the display or by pressing the Windows key on the keyboard.
b)
Click "
" in the bottom area of the Start menu and then click "Restart".
The Primebook shuts down and restarts.
Proceed as follows to shut down and completely switch off the Primebook:
a)
Open the Start menu by clicking the Windows icon on the bottom left of
the display or by pressing the Windows key on the keyboard.
b)
Click "
" in the bottom area of the Start menu and then tap "Shut
down". The Primebook shuts down.

25. Useful tips on saving energy

Deactivate the WiFi function when it is not in use.
Deactivate the Bluetooth connection when it is not in use.
Only leave the Primebook connected to the socket until the battery is fully
charged.
Switch to standby mode when the Primebook is not in use or switch it off
completely.
31

Advertisement

Table of Contents
loading

Table of Contents