Table of Contents
Advertisement
Installation
Installation of your SV1 Receiver is easy:
1. Choose a location in your vehicle where you will
mount the Receiver, either on the visor, the
dash, or the windshield.
2. Mount the Receiver on the visor using the clip
mount, or on the windshield using the suction
cup mount.
4. Install the magnetic antenna on the roof of the
vehicle, and route the antenna cable to the
Receiver.
4. Connect the power cord for the Receiver to your
vehicle's cigarette lighter.
5. Subscribe to the SIRIUS service and begin
enjoying the SIRIUS entertainment!
Location
Choose a location in your vehicle where the
Receiver will not block your vision, interfere with the
vehicle controls, or obstruct the air bag. If you are
using the suction cup mount, the location should be
suitable for using the suction cup mount, such as
the windshield or other flat, smooth surface.
The location should be easily reachable and provide
SV1 Receiver User and Installation Guide
good visibility of the Receiver.
Mounting the Receiver
Attach the desired mounting device to the to the
receiver by sliding the flat portion of the visor/dash
mount or suction cup mount into slot on the top
edge of the Receiver. Gently slide the mounting
device in until it clicks into place.
Next, attach the Receiver to the visor or the
windshield. If you are using the suction cup mount,
lightly moistening the surface of the suction cups
which face the windshield will help the suction cups
adhere.
7
Advertisement
Table of Contents
