Table of Contents
Advertisement
preset list. By using the FM Frequency button, a
quiet FM frequency may be quickly tuned.
If no FM frequencies have been preset when the FM
Frequency button is pressed, the Receiver will
default to a frequency of 88.1 MHz.
A preset list of FM frequencies suitable for receiving
the broadcast from the Receiver over an FM radio in
your location is created by using the FM Presets
menu option of the Receiver. (Refer to the FM
Transmitter section in the Menu Options section of
this manual for instructions on programming the FM
presets list.)
SV1 Receiver User and Installation Guide
Menu Options
To enter the Menu Options page of the Receiver,
press and hold the select button, or press the
MENU button on the remote control. The menu
options will be then displayed.
F
M
T
R
A
N
S
To select a menu option, use the channel up and
down buttons to display the option you wish to
adjust, and press the select button. If a selection is
not made within 10 seconds, the Receiver will exit
the menu options mode, and revert to the last active
display mode.
To exit menu options, or any of the other menu
option screens, repeatedly press and release the
MENU key on the remote control until you are
returned to the default display screen.
The following sections explain each of the menu
options in the order in which they are displayed on
the Menu Options screen.
M
I T
T
19
Advertisement
Table of Contents
