Table of Contents
Advertisement
SB-WA730GCP
7.2.6.
Disassembly and checking of the
AC Inlet P.C.B., Power P.C.B. and
Transformer P.C.B.
Follow Step (1) to Step (5) described in section 7.2.4.
Follow Step (1) to Step (4) described in section 7.2.5.
Step 1: Remove the P.C.B. support by pushing the claws as
arrow shown.
Step 2: Disconnect the connector (CN502).
Step 3: Lift up the AC Inlet P.C.B. as arrow shown.
Step 4 & 5: Remove 8 screws.
All manuals and user guides at all-guides.com
Step 6: Remove 4 screws.
Step 7: Connect back the connector CP502 between Power
and AC Inlet P.C.B. for checking.
7.2.7.
Follow Step (1) to Step (5) described in section 7.2.4.
Follow Step (1) to Step (4) described in section 7.2.5.
12
Replacement of Power IC and
Transistor
Advertisement
Table of Contents
