Hussmann XR75CX Installation & Operation Manual page 23

P/N 3143042_B
12. Install door frame gaskets to wiper
retainer. Start the wiper by angling the
part as shown.
13. Attach vertical wipers to mullions. Start
at the bottom, approximately ½" from
bottom.
14. Attach cam and shoulder screw
Insert the shoulder screw through the slot in
the cam, and attach the screw to the bottom
plate assembly. Use impact driver to seat
screw. The torques should be approximately
19"/lbs. Never pry the cam open when
installing. Prying the cam will permanently
damage the cam.
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
(Outside of
Case)
Outside of case
Step #1
Install door frame gaskets to wiper retainer. Start the wiper by angling the part as shown
Door frame
gasket
Wiper retainer
Step #1
Attach Cam and Shoulder Bolt
Insert the Shoulder screw through the slot in the cam and attach the screw to the Bottom plate
assembly. Use Impact driver to seat screw. The torques should be approximately 19 in/lbs
NEVER PRY THE CAM OPEN TO INSTALL . THIS WILL PERMANENTLY DAMAGE THE CAM
Step #2
Step #2
Vertical Wiper
Attach Vertical wipers to Mullio
Start at Bottom, approximately
bottom
Cam and Shoulder
Cam and shoulder
screw
Screw
Bottom Plate
Bottom plate
assembly
Assembly
EGPF Merchandisers
1-19