Lennox LM018CI-115P432-1X Owner's Manual page 16

Introduction for buttons on remote controller
on indoor unit's display. The setting on remote controller is selected circularly as below:
When selecting "
unit displays set temperature; When selecting "
indicator on indoor unit displays indoor ambient temperature; 3s later or within 3s it
receives other remote controller signal that will return to display the setting temperature.
Caution:
This model hasn't outdoor ambient temperature display function. While remote controller
•
can operate "
It's defaulted to display set temperature when turning on the unit.
•
Only for the models with temperature indicator on indoor unit.
•
12
TURBO button
Press this button to activate / deactivate the Turbo function which enables the unit to
reach the preset temperature in the shortest time. In COOL mode, the unit will blow
strong cooling air at super high fan speed. In HEAT mode, the unit will blow strong
heating air at super high fan speed.
13
X-FAN
X-FAN function: In COOL or DRY mode, the icon
will continue operation for 2 minutes in order to dry the indoor unit even though you
have turned off the unit. After energization, X-FAN OFF is defaulted. X-FAN is not
available in AUTO, FAN or HEAT mode.
function: turn on the display's light and press this button again to turn off the display's
light. If the light is turned on,
14
I FEEL button
Press this button to turn on I FEEL function. The unit automatically adjust temperature
according to the sensed temperature. Press this button again to cancel I FEEL function.
15
/
button
Press this button to achieve the on and off of healthy and scavenging functions in
operation status. Press this button for the first time to start scavenging function; LCD
displays " ". Press the button for the second time to start healthy and scavenging
functions simultaneously; LCD displays "
time to quit healthy and scavenging functions simultaneously. Press the button for the
fourth time to start healthy function; LCD display "
the operation above. (This function is applicable to partial of models)
no display
" with remote controller or no display, temperature indicator on indoor
" and indoor unit displays set temperature.
button
is displayed. If the light is turned off,
" with remote controller, temperature
is displayed and the indoor fan
" and " ". Press this button for the third
". Press this button again to repeat
11
disappears.