Zooming - Canon ZR30 MC Instruction Manual

Zooming

10× optical zoom
The camcorder's 10× zoom lens allows you to choose the best picture angle for
each scene:
• Move the zoom control towards W to zoom out to wide-angle.
• Move it towards T to zoom in to telephoto.
You can also control the speed of zooming:
• Move the control slightly to zoom slowly.
• Move it farther to zoom more quickly. (The farther you move the zoom control,
the faster the zoom speed.)
The T and W buttons on the wireless controller adjust the picture angle, but not
the zoom speed.
200× digital zoom
Magnifies the camcorder's zoom range by up to 20× (up to 4× when using a
memory card).
The zoom control continues to work as usual. You can freely zoom in and out
between 1× and 200× magnification — the camcorder automatically switches
between optical zooming (up to 10×) and digital zooming (10× to 200×).
,
+
TAPE CAMERA
CAM.SET UP
( 37)
To change the digital zoom, open the menu and select CAM.SET UP. Then
select D.ZOOM, set it to OFF or 200× and close the menu.
Notes:
• When zooming, as a rule, keep at least 3 ft 3
subject. However when the zoom is at the wide-angle position, you can focus
on a subject as close as
• Image resolution is slightly lower when the magnification is greater than 10×.
• You cannot use digital zoom when the multi-image screen is set. The display
becomes "– – –".
• The zoom indicator appears for 4 seconds. When the digital zoom is set to 40×,
the zoom indicator extends (light blue).
When the digital zoom is set to 200× zoom, the zoom indicator extends again (a
darker blue).
W
Zoom out
+
CARD CAMERA
D.ZOOM••••••
3 / in (1 cm).
8
×
40
3
/ in (1 m) between you and your
8
Zoom in
T
Card 40×
23
E