Canon ZR30 MC Instruction Manual page 22

• The recording mode might not appear in the display correctly if you switch
between
E
video device.
• When the recording mode is changed to
the image for appropriate recording in that mode.
• You might not be able to do DV dubbing correctly with the camcorder set to
SP or
16:9 (Widescreen TV recording)
Produces images in the 16:9 format for
playback on widescreen TVs.
+
TAPE CAMERA
( 37)
To switch 16:9 to ON, open the menu and select CAM.SET UP. Then select
16:9, set it to ON and close the menu.
Notes:
• "16:9" is shown in the display when you switch the 16:9 mode on.
• You cannot use the 16:9 mode with the Easy Recording program.
• You cannot use the 16:9 mode when the multi-image screen is set. The 16:9
display becomes set to "– – –".
• If you play back a recording made for 16:9 on a normal TV screen, the image
will appear to be vertically "squashed" (compressed).
• If you connect the camcorder to a TV with an S1 terminal or the Video ID-1
system, recordings made in the 16:9 mode for wide screen TVs will
automatically play back in wide screen mode on the TV screen.
Confirmation/Warning beeps
The camcorder's short operation confirmation beeps are indicated by ` in the
illustrations. Beeps sound upon certain camcorder operations such as when you
turn the camcorder on, during the self-timer countdown, right before the
camcorder's automatic shut-off, and also upon any unusual condition of the
camcorder. Beeps are not recorded on the tape.
+
TAPE CAMERA
( 37)
To turn the beep off, open the menu and select SYSTEM. Then select BEEP,
set it to OFF and close the menu.
22
SP and LP while the camcorder is connected to another digital
LP mode.
CAM.SET UP
,
+
TAPE
SYSTEM
SP or
16:9••••••••OFF
,
PLAY
+
CARD
(VCR)
BEEP••••••••ON
LP, the camcorder modifies
,
+
CAMERA CARD
PLAY
(VCR)