Advertisement
1. Carriage bolt (3/8 x 1 inch)
2. Flange nut (3/8 inch)
7
Installing the New Blades
No Parts Required
Procedure
WARNING
The blades are sharp. Contact with a sharp
blade can cause serious personal injury.
Wear gloves or wrap the sharp edges of the
blade with a rag.
Refer to the Operator's Manual for instructions on
installing the blades.
The recycler blades are sold separately. Contact your
Authorized Service Dealer.
Figure 9
3. Center baffle
4. Left baffle
Tightening all Fasteners
No Parts Required
Procedure
1.
2.
9
5. Right baffle
8
Tighten all nuts and bolts for the baffles
2,
Figure
3,
Figure
6,
Rotate the blades and ensure that there is
clearance between the blades and the baffles.
If there is interference, loosen the baffle and
reposition it.
(Figure
Figure
7, and
Figure
9).
g037369
Advertisement
