Table of Contents
Advertisement
16
www.aeg.com
Use this option to add a pre-wash
phase at 30 °C before the washing
phase.
This option is recommended for
heavily soiled laundry, especially if
containing sand, dust , mud and other
solid particles.
The options can increase the
programme duration.
8.6 Spoelen
With this button you can select one of the
following options:
• Extra Spoelen option
This option adds a few rinses
according to the selected washing
programme.
Use this option for persons allergic to
detergent residues and in areas
where the water is soft.
This option increases
slightly the programme
duration.
• Skipping wash phase - Only rinse
option
The appliance performs only the
rinsing phase, the spinning and the
draining phases of the selected
programme.
The corresponding indicator above the
touch button illuminates.
8.7 Anti-allergie
Set this option with white Katoen items
programme. When the option is selected,
neither the temperature or the cycle time
can be changed. Option Tijd besparen
and Extra silent
The corresponding indicator above the
touch button illuminates.
This option, thanks to washing phase
combined with steam vapour , removes
more than 99,99% of bacteria and
viruses keeping the temperature above
60°C throughout the washing phase; with
an additional action on the fibers thanks
to a vapour phase, an enhanced rinsing
phase ensures a proper removal of
detergent and micro-organism residues.
are not available.
This option ensures also a proper
reduction of pollens/allergenic items.
Tested for Staphylococcus
aureus, Enterococcus
faecium, Candida albicans,
Pseudomonas aeruginosa
and MS2 Bacteriophage in
external test performed by
Swissatest Testmaterialien
AG in 2021 (Test Report No.
202120117).
8.8 Tijd besparen
With this option you can decrease the
programme duration.
• If your laundry is normally or lightly
soiled, it may be advisable to shorten
the washing programme. Touch this
button once to decrease the duration.
• In case of smaller load, touch this
button twice to set an extra quick
programme.
The display shows the indicator
8.9 Soft Plus
Set the Soft Plus option to ensures
perfect distribution of the fabric softener
and improves the fabric softness.
This option increases slightly
the programme duration.
8.10 Startuitstel
With this option you can delay the start of
a programme in a more convenient time.
Touch the button repeatedly to set the
required delay. The time increases by
steps of 30 minutes up to 90' and from 2
hours up to 20 h.
After touching the Start/Pauze button,
the display shows the indicator
the selected delay time and the
appliance begins the countdown.
8.11 Start/Pauze
Touch the Start/Pauze button to start,
pause the appliance or interrupt a
running programme.
.
and
Advertisement
Table of Contents
