Sewing; Changing The Pattern To A Different One - JUKI LK-1900BN Series Instruction Manual

5-5. Sewing

➡

5-6. Changing the pattern to a different one

 ❷
WARNING :
Make sure without fail of the contour of the sewing pattern after selection of the sewing pattern.
If the sewing pattern extends outside the work clamp feet, the needle will interfere with the work
clamp feet during sewing, causing dangerous troubles including needle breakage.
1) Set a workpiece on the work clamp foot section.
2) When you depress the pedal to the first step, the
work clamp comes down. When you release the
pedal, the work clamp goes up.
3) Depress the pedal switch to the second step after
descending the work clamp feet at the first step,
and the sewing machine will start sewing.
4) After the sewing machine completes sewing, the
work clamp feet will go up, and return to the sew-
ing start position.
❼
Press READY key
LED  .
Set a pattern number with DATA CHANGE key
Set the XY enlargement/reduction scale and speed
as with
Press READY key
LED  to enable sewing.
－ －
22
❷ to turn off SET READY
❼ .
"I.5-3. Setting the item data"
❷ to light up SET READY
p.18.