Activate the HD/SD SDI output and select the appropriate video output option (HD or SD).
1. Set the POWER dial to
2. Open the menu and select [SIGNAL SETUP]. Select [SDI OUTPUT] and set it to [ON].
3. From the same [SIGNAL SETUP] submenu select [SDI SPEC.]. Select [AUTO] or
[SD LOCKED] to match the video output you wish to use.
4. Close the menu.
Using the COMPONENT OUT (D-) Terminal
2
Open the terminal cover
DTC-1000 Component Video Cable (supplied)
Select the appropriate component video signal depending on the TV or monitor you connect.
Open the menu and select [SIGNAL SETUP]. Select [COMP. OUT], select a setting option
and close the menu.
.
Signal flow
Signal flow
Stereo Cable
(supplied)
Red
Green
Blue
E
INPUT
VIDEO
L
AUDIO
R
S (S1)-VIDEO
101