Protecting Photos - Canon VIXIA HF20 Instruction Manual

• Photos will be recorded on the memory selected for recording
photos ( 42).
• [ Photo Sequence]:
- Up to 100 photos can be captured at a time.
- The photo sequence capture will stop when the end of the scene is
reached (playback will pause at the beginning of the following scene).
- Photos will be captured at intervals of 1/30 second (1/24 second, if
the scene was recorded at a frame rate of [

Protecting Photos

You can protect photos from accidental erasure.
Protecting Single Photos
1 In single photo view, open the photo selection screen.
FUNC. [
[ Protect] appears on the screen.
2 Select ( ) the photo you want to protect.
3 Press to protect the photo.
appears on the bottom bar and the photo cannot be deleted. Press
again to remove the protection.
4 Repeat steps 2-3 to protect additional photos or press
twice to close the menu.
Protecting Photos from the Index Screen
Options
[Individual Photos]
ing Single Photos (
dure to protect the photo.
[Selected Photos]
(marked with a
from the Index Screen (
[Remove All]
104
Photos
Protect]
Opens the same screen described in Protect-
104). Continue from step 3 of that proce-
Protects all the photos selected in advance
checkmark). Refer to Pre-selecting Recordings
Removes the protection from all photos.
(
57).
PF24]).
34)
FUNC.