Audio Settings - Pioneer DMH-WT86NEX Operation Manual

Menu Item
[Home Custom Setting]
*1 Refer to Still image source (page 60).
*2 You can preview the home menu screen or the AV operation screen by touching [Home] or [AV]
respectively.

Audio settings

The menu items vary according to the source. Some of the menu items become
unavailable when the volume is set to mute.
Menu Item
[Fader/Balance]
[Loudness]
[Off] [Low] [Mid] [High]
[Source Level Adjuster]
[-4] to [+4]
Description
Customize the home menu screen of the following items.
• Switch the favorite source/application area
• Customize the displayed favorite source/application
• Rearrange the displayed favorite source/application
Description
Touch or to adjust the front/rear speaker balance.
Set [Front] and [Rear] to [0] when using a dual speaker
system.
Touch or to adjust the left/right speaker balance.
TIP
You can also set the value by dragging the point on the displayed
table.
NOTE
This function is available when [Standard Mode] is selected as the
speaker mode and [Rear] is selected in [Rear Speaker Output].
Compensates for deficiencies in the low-frequency and
high-frequency ranges at low volume.
Adjust the volume level of each source to prevent radical
changes in volume when switching between sources other
than FM.
Touch or to adjust the source volume after
comparing the FM tuner volume level with the level of the
source.
TIP
If you directly touch the area where the cursor can be moved, the
SLA (source level adjustment) setting will be changed to the value
of the touched point.
NOTES
• Settings are based on the FM tuner volume level, which remains
unchanged.
• This function is not available when the FM tuner is selected as
the AV source.
- 115 -