Clock - Philips FW-C10 Manual

All manuals and user guides at all-guides.com
RECORDING
21
• Recording will start automatically.
5 Press STOP•OPEN on tape deck 1
and tape deck 2 to stop dubbing.
Notes:
– At the end of side A, flip the tapes to
side B and repeat the procedure.
– Dubbing of tapes is only possible from
tape deck 2 to tape deck 1.
– To ensure good dubbing, use tapes of
the same length.
Recording from other
sources
(only on tape deck 1)
1 Load a blank tape into tape deck 1.
2 Press CD, TUNER or AUX.
• Start playback of the selected source.
3 Press RECORD on tape deck 1 to
start recording.
™ The
starts flashing.
REC
4 Press PAUSE to interrupt
recording.
5 Press STOP•OPEN on tape deck 1
to stop recording.
Note:
– During recording, it is not possible to
listen to another sound source.
pg 01-28/C1-C10/37-En 21

CLOCK

FW- C10 MINI HIFI SYSTEM
STANDBY-ON
CD1 • 2 • 3 FM •AM TAPE 1 • 2
CD TUNER TAPE
TUNING
SEARCH STOP• CLEAR PLAY• PAUSE PREV
DIGITAL
DSC
SOUND
PROGRAM CLOCK•TIMER
CONTROL
DIGITAL SOUND CONTROL
View Clock Clock Setting
You can view the clock (if it is set) if the The clock can be set in either 12- or
system is in Standby mode or when any 24-hour mode, e.g. "12:00
sound source is selected (CD, TUNER, "00:00". Before setting the clock, you
etc.). The clock will be displayed for must be in the View Clock mode.
about seven seconds.
1 Press CLOCK•TIMER to select
• Press CLOCK•TIMER briefly (on
clock mode.
2 Press PROGRAM to select 12- and
the system only).
or 22:38" (the
™ "10:38
24- hour mode.
PM
™ If 12-hour mode is selected,
current time) will be displayed
depending on whether you have
selected 12- or 24-hour mode.
™ "--:--" will be displayed if the ™ If 24-hour mode is selected,
clock is not set.
3 Set the hour with à or á.
4 Set the minute with í or ë.
5 Press CLOCK•TIMER again to
store the setting.
™ The clock starts.
16/11/1999, 1:57 PM
VIDEO MASTER
VOLUME
AUX
PRESET
NEXT
DIM
" or
AM
"12:00" starts flashing and the
lights up.
AM
"00:00" starts flashing.
3139 116 19292 (ENG)