Table of Contents
Advertisement
Quick Links
Model No. PFSB53950
Serial No.
The serial number is on a sign
behind the access panel. Write the
serial number in the space above.
Access
Panel
QUESTIONS?
If you have questions, or if there
are missing parts, we will guar-
antee complete satisfaction
through direct assistance from
our factory.
TO AVOID DELAYS, PLEASE
CALL DIRECT TO OUR TOLL-
FREE CUSTOMER HOT LINE.
The technicians on our customer
hot line will provide immediate
assistance, free of charge.
CUSTOMER HOT LINE:
1-888-884-6555
Mon.–Fri., 8 a.m.–5 p.m. CST
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
USER'S MANUAL
Visit our website at
www.proform.com
new products, prizes,
fitness tips, and much more!
Advertisement
Table of Contents
Related Manuals for Pro-Form MAGNUM PFSB53950
Summary of Contents for Pro-Form MAGNUM PFSB53950
- Page 1 Model No. PFSB53950 USER’S MANUAL Serial No. The serial number is on a sign behind the access panel. Write the serial number in the space above. Access Panel QUESTIONS? If you have questions, or if there are missing parts, we will guar- antee complete satisfaction through direct assistance from our factory.
-
Page 2: Table Of Contents
Table of Contents Posting the Warning Sign ..............2 Important Safety Instructions . -
Page 3: Important Safety Instructions
Important Safety Instructions WARNING: To reduce the risk of drowning, electric shock, or serious injury, read the fol- lowing important precautions before using the hydrotherapy spa. READ AND FOLLOW ALL INSTRUCTIONS 1. It is the responsibility of the owner to ensure 10. - Page 4 20. DANGER—Risk of electric shock. Keep all physician before using the hydrotherapy spa. electrical appliances such as radios, tele- Pregnant women should not use the spa if phones, televisions, and lights at least five the water temperature is above 100°F; the feet away from the water.
- Page 5 35. WARNING: The spa jets produce a stream of water with relatively high pressure. Prolonged exposure of a localized area of the body may cause bruises to the skin. 36. The included warning sign must be posted where all users of the hydrotherapy spa can see and read it.
-
Page 6: Before You Begin
Before You Begin Congratulations for selecting the new PROFORM ® For your benefit, read this manual carefully before using the hydrotherapy spa. If you have questions MAGNUM hydrotherapy spa. The innovative MAG- NUM spa allows you to enjoy all the benefits of after reading the manual, please call our Customer hydrotherapy in the comfort and privacy of your home. -
Page 7: Choosing A Location For The Hydrotherapy Spa
Choosing a Location for the Hydrotherapy Spa There are many factors to consider when choosing a location to set up the hydrotherapy spa. These factors vary depending on whether you plan to use the spa inside or outside. We have listed several factors you may wish to consider as you decide where to set up the spa. -
Page 8: Wiring The Hydrotherapy Spa
Wiring the Hydrotherapy Spa This procedure must be performed by a qualified, licensed electrician in accrodance with the nation- Option 1 al electric code, and with all local, state, and feder- al electric code. Under no circumstances should Main Panel the hydrotherapy spa be wired by someone other GFCI Circuit Min. -
Page 9: Assembly
Assembly Place all parts of the hydrotherapy spa in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires your own phillips screwdriver 1. Before beginning assembly, make sure that you have read and understand the information above and on the previous two pages. - Page 10 3. Make sure that a qualified electrician has wired the spa to a 240 volt power source. Fill to here Remove the two warning decals (see page 5) from the spa shell. Using a damp cloth, wipe the spa shell clean.
-
Page 11: Using The Hydrotherapy Spa
Using the Hydrotherapy Spa The hydrotherapy spa is designed to seat seven Once the countdown has reached “000,” “Pr” will adults. The spa holds approximately 375 gallons of be displayed. “Pr” indicates that the controller is in water and offers a heating system (80°F to 104°F), a the two-pump priming mode. - Page 12 8. After one minute, the current temperature of the Once you have tested the GFCI, verify that water is water will be displayed. Push the temperature up flowing from the jets. Set the air controls to the lowest or down button to set the temperature of the setting (see USING THE CONTROLS on page 14).
-
Page 13: Jet Layout Diagram
Jet Layout Diagram A. The underwater light can be used for night opera- G. The two neck jets can be adjusted to spray sooth- tion (see USING THE CONTROLS on page 14). ing water on your neck. B. The ten air injectors create air bubbles that H. -
Page 14: Using The Controls
Using the Controls Air Controls 1, 2, and 3 Blower Mode Air Control 4 Button Button Display Pump Pump Light Temperature Button 1 Button 2 Button Buttons standard mode is selected. • Economy Mode heats the spa to the set tempera- ture only during the filter cycles. - Page 15 The Temperature buttons control the temperature set- Your spa features an LED light with twelve different programmed lighting effects: ting of the water. The temperature setting can be from 1. Lights cycle between Red, Green, and Blue 80°F to 104°F. The startup temperature is set at 2.
-
Page 16: Maintenance
Maintenance MAINTAINING THE SPA COVER The hydrotherapy spa is designed to provide years of enjoyment. Please follow the guidelines below to properly maintain your spa. The spa cover should be cleaned monthly. To clean the spa cover, use water and a non-abrasive cleaner MAINTENANCE SCHEDULE on the entire cover. - Page 17 WATER CHEMISTRY To maintain the proper pH level, test the pH of the water regularly. To test the water, purchase a pH test Maintaining the pH level of the water is very important kit at a pool and spa supply store. The pH reading to the operation of the spa.
- Page 18 ATTACHING AND REMOVING THE ACCESS PANEL and warping of the spa shell. Any damage caused by sun exposure is not covered under warranty. Turn off the spa power. Remove the eight #10 x 2” Machine Screws (37) that secure the indicated Access To drain the hydrotherapy spa, follow the steps below: Panel (25) to the spa.
- Page 19 DRAINING THE PUMPS REPLACING THE LED LIGHT After the hydrotherapy spa is drained, the jet pumps Remove the access panels (see ATTACHING AND should also be drained if the spa will be stored for REMOVING THE ACCESS PANELS on page 18). more than thirty days or if it may be exposed to freez- Make sure the spa power is turned off.
-
Page 20: Troubleshooting
Troubleshooting Most problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, call our Customer Service Department toll-free at 1-877-897-7493, Monday through Friday, 8 a.m. until 5 p.m. Central Time. 1. - Page 21 9. SYMPTOM: THE WATER LEVEL DROPS 11. SYMPTOM: THE CONSOLE DISPLAYS “--,” “OHH,” “ICE,” “SnA,” “SnB,” “SnS,” “HFL,” “LF,” “dr,” “OHS,” or “drY” a. A clamp or seal inside the pump compartment may be loose. Check inside the pump compart- ment for excess water and watch the pump unit a.
-
Page 22: Part List
Part List—Model No. PFSB53950 R0604A Key No. Qty. Description Key No. Qty. Description Console With Overlay Panel 3-wire Power Cord Heater Collar With Screw Filter Cover Volcano Jet Rubber Washer Drain Plug Filter Cartridge #10 x 2” Machine Screw Rubber Isolator Pillow CD Player Drain Plug O-ring... -
Page 23: Exploded Drawing
Exploded Drawing—Model No. PFSB53950 R0604A... -
Page 24: Ordering Replacement Parts
Ordering Replacement Parts To order replacement parts, simply call our Customer Service Department toll-free at 1-888-884-6555, Monday through Friday, 8 a.m. until 5 p.m. Central Time (excluding holidays). To help us assist you, please be prepared to give the following information when calling: •...