Using Headphones - Canon VIXIA HF G10 Instruction Manual

Using Headphones

Use headphones for playback or to check the audio level while recording. The headphones are
connected to the AV OUT/X terminal, which is used for both the headphones and the audio/video
output. Before connecting the headphones, follow the procedure below to change the function of the
terminal from AV output to X (headphones) output.
Operating modes:
* Headphones can be used also in
this mode. Change the setting in advance in one of the other operating modes.
1 Open the [AV/Headphones] screen.
[FUNC.] [MENU]
• Touching [FUNC.] is necessary only when performing the procedure in a recording mode.
2 Touch [Headphones] and then touch [f].
3 Connect the headphones to the AV OUT/X terminal.
4 Back in the menu, touch [Volume].
5 Touch [c] or [d] to adjust the volume and then touch [a].
• You can also drag your finger along the [Headphones] bar.
• J will appear on the screen.
To adjust the volume during playback
In mode, and in
same way you adjust the speaker's volume (0 88).
IMPORTANT
• When using headphones, make sure to lower the volume to an appropriate level.
• Do not connect the headphones to the AV OUT/X terminal if the J icon does not appear on the
screen. The noise output in such case may be harmful to your hearing.
NOTES
• Use commercially available headphones with a ∅ 3.5 mm minijack.
• Even if [AV/Headphones] was set to [J Headphones] in a playback mode, the function of the AV
OUT/X terminal will return automatically to AV output when you turn off the camcorder.
*
mode but the function of the terminal cannot be changed in
6
[AV/Headphones]
mode during slideshow playback, adjust the headphones volume the
Using Headphones
71