Insignia Sauna Series Installation Manual
Hide thumbs
Also See for Sauna Series:
- Installation manual (18 pages) ,
- Installation manual (29 pages)
Table of Contents
Advertisement
Quick Links
www.insigniashowers.com
Last Modified: 07/10/2021
INSTALLATION MANUAL
RW108/RW110
Sauna Series
30 Day Technical Support:
Call 01908 317512 and request technical support for
aiding your installation.
Replacements Parts:
Inside of your warranty period
visit:
https://www.insigniashowers.com, click support and
make a warranty claim.
Spares/Replacements Parts:
Outside of your warranty
ATTENTION INSTALLERS:
These instructions must be
left with the customer
CHECK ALL CONTENTS BEFORE BUILD COMMENCES. NO RETURNS CAN BE MADE
ONCE THE BUILD HAS STARTED AS IT IS DEEMED ACCEPTANCE OF PRODUCT!
Advertisement
Table of Contents
Related Manuals for Insignia Sauna Series
Summary of Contents for Insignia Sauna Series
- Page 1 Last Modified: 07/10/2021 INSTALLATION MANUAL RW108/RW110 Sauna Series 30 Day Technical Support: Call 01908 317512 and request technical support for aiding your installation. Replacements Parts: Inside of your warranty period visit: https://www.insigniashowers.com, click support and make a warranty claim.
-
Page 2: Table Of Contents
www.insigniashowers.com Last Modified: 07/10/2021 Contents Thank you for your purchase Electrical & Tool requirements Box contents Left Back Panel to Base Install Right Back Panel Install Large Bench Heater Install Large Bench Install Small Bench Heater Install Small Bench Install Bench Block Install Connecting Door and Fixed Glass Panels Door and Fixed Glass Panel Install... -
Page 3: Thank You For Your Purchase
Last Modified: 07/10/2021 Thank you for your recent purchase of an Insignia Sauna. Please read this booklet with great care to ensure you get the best out of your build and have a Sauna that will last for many years to come! Like everything, in order to obtain a first class product that will serve you well for many years, the effort and correctness put into the assembly will reflect in the quality of your finish. -
Page 4: Electrical & Tool Requirements
www.insigniashowers.com Last Modified: 07/10/2021 Electrical Requirements RW108 Tools Required Electrical Requirements RW110 • Scissors Voltage Rating 220-240AC Voltage Rating 220-240AC • Knife Frequency Rating 50Hz Frequency Rating 50Hz • Spirit Level Power Rating 3400 Watts Power Rating 3000 Watts • Tape Measure Amperage 14.1 Amps Amperage 12.5 Amps... -
Page 5: Box Contents
Screw Pack 40mm Screw Wooden Dowel VERY IMPORTANT Have you got everything? If not please contact the Insignia directly on 01908 317 512. Remember NEVER book your tradesman until everything has arrived, been checked and is present. No replacement/missing parts can be obtained free of charge during or after the build. -
Page 6: Left Back Panel To Base Install
www.insigniashowers.com Last Modified: 07/10/2021 Step 1 — Placing the base and the left back panel in position... -
Page 7: Right Back Panel Install
www.insigniashowers.com Last Modified: 07/10/2021 Step 2 — Connecting the right back panel to the left back panel Please Note: Screws connect on the interior of the Sauna 3x 35mm Screws... -
Page 8: Large Bench Heater Install
www.insigniashowers.com Last Modified: 07/10/2021 Step 3 — Installing long bench heater Slide the bench heater between the two wooden struts Connect heater panel to back panel using the wires below. -
Page 9: Large Bench Install
www.insigniashowers.com Last Modified: 07/10/2021 Step 4 — Installing the long seat Slide the top of the seat into position, resting on the wooden struts. -
Page 10: Small Bench Heater Install
www.insigniashowers.com Last Modified: 07/10/2021 Step 5 — Installing short bench heater Slide the bench heater between the two wooden struts Connect heater panel to back panel using the wires below. -
Page 11: Small Bench Install
www.insigniashowers.com Last Modified: 07/10/2021 Step 6 — Installing the short seat Slide the top of the seat into position, resting on the wooden struts. -
Page 12: Bench Block Install
www.insigniashowers.com Last Modified: 07/10/2021 Step 7 — Installing the side bench blocks Slide the bench blocks into position... -
Page 13: Connecting Door And Fixed Glass Panels
www.insigniashowers.com Last Modified: 07/10/2021 Step 8 — Connecting the door and fixed glass panels Align the connection (left) located along the door and the front fixed glass panels. Slot together and push the fixed glass panels down for a secure connection. -
Page 14: Door And Fixed Glass Panel Install
www.insigniashowers.com Last Modified: 07/10/2021 Step 8 — Installing the door and fixed glass panels to the back panels Lift into position and connect the fixed panels to the front fixed glass. 6x 35mm Screws... -
Page 15: Roof Install
www.insigniashowers.com Last Modified: 07/10/2021 Step 9 — Installing the Roof The roof simply slots into position. Now the Sauna is assembled, take the wooden dowels and insert over any screw to give the Sauna a sleek and neat finish. -
Page 16: Connecting The Electrics
www.insigniashowers.com Last Modified: 07/10/2021 Step 8 — Connecting the power The power box is located on the roof. Take all power cables from the panel heaters and the control panel and connect together. Connect the control panel to the lights and speakers, located in the roof. -
Page 17: Control Panel Instructions
www.insigniashowers.com Last Modified: 07/10/2021 Control Panel Instructions Button 1/2 (Temperature) Use the plus and minus buttons to change the temperature your sauna will reach. Button 3/4 (Time) Use the plus and minus buttons to change the duration of the sauna session, until the heaters automatically shut off. -
Page 18: Sauna Room Safety Guide
www.insigniashowers.com Last Modified: 07/10/2021 Sauna Usage & Safety Guide Never leave children unattended in the Sauna. Regulate the temperature of sauna before session - Pre-heat time 15-30 minutes (from room temperature 20c) Never touch the heater panels whilst in operation, possible burning may occur. Recommended time of use 15-20 minutes per session Stay hydrated during each Sauna session. -
Page 19: Weee Compliance Statement
(EEE) have to fulfil certain obligations. Under the WEEE directive Insignia is considered the producer of certain products we supply and in line with the demands of the legislation we are pleased to offer the op- portunity to return these products to us for treatment and recycling. - Page 20 www.insigniashowers.com Last Modified: 07/10/2021...