Connections/Editing; Connections To A Tv Or Vcr; Dubbing To A Vcr - JVC GR-D850AG Instructions Manual

Connections To A TV Or VCR

S Cable
(optional)
TV
1 Yellow to VIDEO IN (Connect when your
TV/VCR has only A/V input connectors).
2 Red to AUDIO R IN*
3 White to AUDIO L IN*
4 To S-VIDEO IN (Connect when your
TV/VCR has S-VIDEO IN and AV input
connectors. In this case, it is not necessary
to connect the yellow video cable.)
* Not required for watching still images only.
Note:
The S-Video cable is optional. Be sure to
use the YTU94146A S-Video cable. Consult
the JVC Service Centre described on the
sheet included in the package for details on
its availability. Make sure to connect the end
with a core fi lter to the camera. The core fi lter
reduces interference.
1
Make sure all units are turned off.
2 2
Connect the camcorder to a TV or VCR as
shown in the illustration.
If using a VCR, go to step
If not, go to step
To AV
connector
or
Audio/Video cable
(provided)
VCR
3 3
.
4 4
.

Connections/Editing

3 3
Connect the VCR output to the TV input,
referring to your VCR's instruction manual.
4 4
Turn on the camcorder, the VCR and the
TV.
5 5
Set the VCR to its AUX input mode, and
set the TV to its VIDEO mode.
6 6
Start playback on the camcorder (
• Please set "WIDE TV" of Playback Menus
so that the image may suit your TV (16:9
TV or 4:3 TV) (
To choose whether or not the following
displays appear on the connected TV
• Date/Time
Set "DATE/TIME" to "ON", "AUTO" or "OFF"
( 32).
• Time Code
Set "TIME CODE" to "ON" or "OFF" (
• On Screen
Set "ON SCREEN" to "OFF", "LCD" or
"LCD/TV" ( 32).
Notes:
• It is recommended to use the AC Adapter
as the power supply instead of the battery
pack. ( 16)
• To monitor the picture and sound from
the camcorder without inserting a tape or
memory card, set the camcorder's
Power Switch to "REC", then set your TV to the
appropriate input mode.
• Make sure you adjust the TV sound volume to
its minimum level to avoid a sudden burst of
sound when the camcorder is turned on.

Dubbing To A VCR

To use this camcorder as a player
1 1
Following the illustration,
"Connections To A TV Or VCR", connect
the camcorder and the VCR's input
connectors.
2 2
1
Perform steps –
Or VCR" ( 41).
3 3
At the point you want to start dubbing, start
recording on the VCR. (Refer to the VCR's
instruction manual.)
4 4
To stop dubbing, stop recording on the VCR,
then stop playback on the camcorder.
41
EN
21).
29, 32).
32).
41,
6 6
"Connections To A TV