Clavia nord STAGE Service Manual page 6

Hide thumbs Also See for nord STAGE:
Table of Contents

Advertisement

MNB: Main board
1.
Mainb
2.
Final
3.
EEPROM
4.
DSP
5.
DAC
6.
Audio
7.
USB
8.
MIDI
9.
Keyboard
10. Pedal
11. Verify
12. Flash test
13. Flash test
thorough
PNL: Panel board
1.
Full
2.
Panel 1
3.
Panel 2
4.
Buttons &
LED
5.
LCD
6.
Encoders
7.
Pitch stick
cal. range
8.
Pitch stick
base value
9.
Pitch stick
10. ADC
ADJ: Only used in production. SYS: Contains system operations.
Clavia DMI
Performs tests 3,12,4,6 and 7.
Only used in production.
Tests the EEPROM.
Tests the five DSP´s, including external memory and
communication between DSP´s.
Tests the two D/A converters. Output a sine wave on the 4 outputs
CH1 Out
220Hz
Toggle between outputs with [ Page+ ] or [ Page- ]
Outputs a 1KHz sine -100dB or noise -70dB on the 4 outputs.
Toggle between sine or noise with [ Page+ ] or [ Page- ]
Shows the USB chip ID. This test can not detect if the USB
communication with a computer is functional. To test USB
communication, simply connect the Stage to a computer running
the Stage manager.
Test MIDI communication.
Connect a cable from MIDI in to MIDI out
Press one key at a time. The test shows which key is pressed and
counts the number of keys pressed.
Tests all the pedal input jacks and the function of the sustain and
rotor pedal. Requires that each pedal is pushed two times.
Only used in Production.
Performs a quick test of the Flash circuits. The entire memory
area is not tested. Flash data is not altered.
Tests the entire Flash memory area. The test takes approximately
18 minutes to complete.
Flash data is not altered.
Only used in production.
Performs tests 4,5,6,7,8,9,10 on panel 1.
Performs tests 4,6,10 on panel 2.
Tests first the LED´s followed by a button test.
Step to next section with [ Page+ ].
Tests the LCD panel.
Tests all of the encoders. Requires that each encoder is turned
two turns.
Shows the Pitch stick calibration range. (36-40)
Shows the Pitch stick base value. (52-74)
Tests the pitch stick function. Left = 0 Right = 64
Tests the function of the A/D converter on the panelboard
Service manual Nord Stage rev. 1.1
CH2 Out
CH3 Out
440Hz
880Hz
CH4 Out
1760Hz
Page 5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents