Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Genie VRD73TDN
Summary of Contents for Genie VRD73TDN
- Page 1 Model: VRD73TDN True Day/Night Vandal Resistant Dome Camera User Manual...
- Page 3 CAUTION RISK OF ELECTRIC SHOCK CAUTION DO NOT OPEN CAUTION RISK OF ELECTRIC SHOCK CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK RISK OF ELECTRIC SHOCK DO NOT OPEN DO NOT OPEN DO NOT REMOVE COVER(OR BACK). CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK NO USER-SERVICEABLE PARTS INSIDE.
-
Page 4: Table Of Contents
Contents Dimensions Package Contents Focus Adjustment Installation General Features Precautions Safety Instructions Menu Set Up • OSD Control Keys • Set Up Menu • Menu Set Up • Lens • Exposure • White Balance • D-WDR/HSBLC • 3D-DNR • Day/Night • Smart-IR • Special • Camera Title... -
Page 5: Dimensions
Camera Dimensions Φ100 Φ150 Package Contents TORK WRENCH T20 1EA FOCUS CONTROL SCREW 1EA GREEN TERMINAL 2P MAIL 1EA INSTRUCTION MANUAL 1EA SCREW TS T1, #8X38 & O-RING ASSY 4EA SCREW PH M4X8, BK, 3EA VIDEO TEST CABLE 1EA - 5 - True Day/Night Vandal Resistant Dome Camera... -
Page 6: Focus Adjustment
Focus Adjustment Adjusting screw for focus(Near-Far) Adjusting screw for fix(Fix) Adjusting screw for angle of view(TELE-WIDE) 1) Loosen the screw in the middle. 2) Ajust angle of view by using the controller. 3) Adjust focus by using the controller. 4) Tighten the screw in the middle. - 6 - True Day/Night Vandal Resistant Dome Camera... -
Page 7: Installation
Camera + Installation TAPPING SCREW #8X38, 4EA MACHINE SCREW M4X8, 3EA Cable Connection Power Input Terminal : AC24V/DC12V Video Output Connector Video (UTP) - 7 - True Day/Night Vandal Resistant Dome Camera... -
Page 8: General Features
General Features Presets 3D-DNR Presets (Outdoor, Indoor, Elevator, Lobby, Hallway & Low Light). Used for a quick and easy setup 3D-DNR according to the prevailing installation environment. Digital 3D-DNR Noise Reduction 3D-DNR 3D Motion DNR 3D-DNR Digital Noise When movements in the picture are detected, 3D-DNR AUTO can reduce the level of noise; with a Reduction 3D-DNR low-level DNR setting. -
Page 9: Precautions
Precautions Do not install the camera in Do not install or use the camera in an Do not install the camera under extreme temperature conditions. environment where the humidity is high. unstable lighting conditions. This can cause poor image quality Only use the camera under conditions Severe lighting change or flicker can where temperatures are between... -
Page 10: Safety Instructions
Safety Instructions Precautions for use : This camera should be installed by a qualified person only. There are no user serviceable parts inside. Do not disassemble this camera other than to make initial adjustments. Only use a CE approved regulated DC12V, or AC24V power supply. Use appropriate low voltage power cable to prevent fire or electrical shock. -
Page 11: Menu Set Up
OSD Control Keys 1. Control Keys are used to access and operate the OSD menu. - 11 - True Day/Night Vandal Resistant Dome Camera... -
Page 12: Set Up Menu
How to Set Up the camera menu PRESET MODE OSD MENU ● - 12 - True Day/Night Vandal Resistant Dome Camera... - Page 13 - 13 - True Day/Night Vandal Resistant Dome Camera...
-
Page 14: Menu Set Up
Menu Set Up Menu items can be selected using the camera OSD buttons 1. PRESET GENIE PRESET MODE INDOOR ADVANCED EXIT 1-1. Preset: INDOOR / OUTDOOR / LOW LIGHT / HALLWAY / LOBBY / ELEVATOR. - Used for a quick and easy setup for the prevailing installation environment. -
Page 15: Lens
3. Change menu settings using the Left or Right buttons. *Available values or status's are displayed by pressing the Left or Right buttons. Press the button until desired value / status is displayed. 4. After changing the setting, move the arrow indicator to EXIT and press the SET button to EXIT. NOTE * Move to the available submenu by moving arrow to desired feature. - Page 16 NOTE * When DC is selected, the brightness can be adjusted. The brightness control range is 1 ~ 100. BRIGHTNESS E.SHUTTER 1/60 (1/50) RETURN 3. Select the desired shutter mode by pressing the Left or Right buttons. 4. Press RETURN to return to the SETUP menu. * FLK: Select FLK mode when flickering occurs;...
-
Page 17: Exposure
Exposure This function is used to select Sens-Up or Auto Gain Control. 1. On the Set Up menu screen select EXPOSURE using the Up or Down buttons. ADVANCED SETUP LENS EXPOSURE WHITE BAL D-WDR/HSBLC HD-DNR AUTO DAY/NIGHT COLOR SMART-IR SPECIAL RETURN EXPOSURE HIGH... -
Page 18: White Balance
* RETURN: Select Return to save the changes in the EXPOSURE menu and retun to the SETUP menu. NOTE * Pressing the SET button in AUTO mode allows adjustment of image brightness by increasing or decreasing the shutter speed (x2 ~x1024). * The higher the level, the brighter the image becomes, but it is possible that an after image (ghosting) could appear. -
Page 19: D-Wdr/Hsblc
* MANUAL: Used for fine adjustment of White Balance. Set White Balance first using ATW or AWC then change to MANUAL and press the SETUP button. Increase or decrease the value of M-WR (Red) and M-WB (Blue) while monitoring the colour of the image. WB MANUAL M-WR M-WB... - Page 20 * OFF: BLC function does not operate. * BLC LEVEL: Select LOW/MID/HIGH BLC ZONE can be set to the desired area by changing the TOP/BOTTOM/LEFT/RIGHT values. BLC LEVEL BOTTOM LEFT RIGHT RETURN * RETURN: Select Return to save the changes in the D-WDR/HSBLC menu and return to the SETUP menu. * HSBLC: HSBLC function is especially effective for reading car number plates at night time.
- Page 21 HSBLC OFF HSBLC ON * D-WDR: This camera which is using a 3D-DNR DSP that provides intelligent light level control to overcome strong backlight conditions. →OFF: D-WDR function does not operate. When images contain both bright and dark areas, this feature makes good quality pictures by making bright areas a little bit darker and dark areas a little brighter.
-
Page 22: 3D-Dnr
3D-DNR 3D-DNR is used to reduce the level of background noise in a low luminance environment. 1. Move the arrow indicator to 3D-DNR using the Up and Down buttons. When movements in the picture are detected, 3D-DNR AUTO can reduce the level of noise; with a low-level DNR setting. - Page 23 2. Select the desired mode using the Left and Right buttons. * COLOUR: The picture is always displayed in colour. * BW: The picture is always displayed in black and white. Select BW using the button and press the menu to activate COLOUR BURST option. D&N-EXT BURST DELAY TIME...
-
Page 24: Smart-Ir
SMART-IR (IR Models Only) SMART-IR: Controls the IR LED (bright portion), saturation is not expected. ADVANCED SETUP LENS EXPOSURE WHITE BAL D-WDR/HSBLC HD-DNR AUTO DAY/NIGHT COLOR SMART-IR SPECIAL RETURN SMART-IR AUTO SET LEVEL RETURN LED Saturation level can be adjusted by changing the SET LEVEL. * NOTE: When setting SMART-IR ON, the function D-WDR, HSBLC, and BLC cannot be used in BW mode. -
Page 25: Special
Special When the SETUP menu screen is displayed, select SPECIAL using the enter buttons. ADVANCED SETUP LENS EXPOSURE WHITE BAL D-WDR/HSBLC HD-DNR AUTO DAY/NIGHT COLOR SMART-IR SPECIAL RETURN Select one of the modes using the Up and Down buttons. SPECIAL CAMERA TITLE ADJUST MIRROR... - Page 26 1-3) Press the SETUP button. CAMERA TITLE ABCDEFGHIJKLMNOP QRSTUVWXYZ012345 6789 ! " # $ % & ' ( ) * + , - . / ↑ ↓ < = > ? @ [ ] ^ _ ← → CLR POS RET ↓ CAMERA 0 0 1 _ _ _ _ _ _ _ 1-4) The CAMERA TITLE can be up to 15 alphanumeric characters in length.
- Page 27 1-5) To select the position where the Camera ID should be displayed on the screen. Move the cursor to POS and press the SET button. CAMERA TITLE ABCDEFGHIJKLMNOP QRSTUVWXYZ012345 6789 ! " # $ % & ' ( ) * + , - .
-
Page 28: Adjust
2. ADJUST: When the SETUP menu screen is displayed, select ADJUST using the Up and Down buttons. SPECIAL CAM TITLE ADJUST MIRROR MOTION DET PRIVACY SYNC RESOLUTION NORMAL RESET RETURN 2-1) SHARPNESS: Select the desired mode using Up or Down buttons. ADJUST SHARPNESS MONITOR... - Page 29 Change the setting value appropriate to your monitor LCD: Select when using a LCD monitor CRT: Select when using a CRT monitor 2-3) GAMMA: Desired gamma values can be adjusted between user 0.20 ~ 1.00. ADJUST SHARPNESS MONITOR LCD/CRT GAMMA 0.55 LANGUAGE ENGLISH...
- Page 30 2-6) COMMUNIATION : ID: Camera ID can be adjusted from 1 to 254. BAUD RATE can be adjusted from 2400bps to 57600bps. PROTOCOL - can only support PELCO-D protocol. COMMUNICATION ADJUST SHARPNESS MONITOR BAUD RATE 9600 BPS GAMMA 0.55 PROTOCOL PELCO-D RETURN LANGUAGE...
-
Page 31: Mirror
2-8) RETURN: Move the arrow indicator to RETURN after completing the setup to return to the SPECIAL menu. ADJUST SHARPNESS MONITOR GAMMA 0.55 LANGUAGE ENGLISH COMMUNICATION DEFFCT AUTO RETURN 3. MIRROR: Flip the image horizontally on the screen. SPECIAL CAM TITLE ADJUST MIRROR MOTION DET... -
Page 32: Motion Detection
4. MOTION DET: When the special menu screen is displayed, use the Up and Down buttons to access the MOTION menu. SPECIAL MOTION DET CAM TITLE ALARM ADJUST AREA MIRROR SENSITIVITY MOTION DET DISPLAY PRIVACY HOLD TIME SYNC RETURN RESOLUTION NORMAL RESET RETURN... -
Page 33: Privacy
5. PRIVACY Hide an area you want to prevent from being displayed on the screen. SPECIAL SPECIAL CAM TITLE 1. CAM TITLE ADJUST 2. ADJUST MIRROR 3. MIRROR 4. MOTION DET MOTION DET 5. PRIVACY PRIVACY SYNC 6. SYNC RESOLUTION NORMAL 7. -
Page 34: Sync
5-2). Set up the area mode using the 4 directional buttons. MASK 1 - 8: You can select up to 8 MD areas. MASK OFF: Disabled ON: Activates area display Move the arrow indicator to DOT XY to increase or decrease the width of cells using the Left / Right buttons - between the adjustable levels. -
Page 35: Resolution
7. RESOLUTION: This function changes the image with reference to the resolution. When set to HIGH, TV Lines are increase but image artefact elements can also increase and general image quality may be affected. Recommended setting is NORMAL SPECIAL SPECIAL 1. -
Page 36: Exit
RETURN Press the SET button in the RETURN menu to save the current settings and exit the SETUP menu. ADVANCED SETUP LENS EXPOSURE WHITE BAL D-WDR/HSBLC HD-DNR AUTO DAY/NIGHT COLOR SMART-IR SPECIAL RETURN - 36 - True Day/Night Vandal Resistant Dome Camera... -
Page 37: Specification
Specification MODEL VRD73TDN Sensor 1/3” Sony Super HAD CCD ll TV System PAL / NTSC Total Pixels PAL=795(H) * 596(V) / NTSC=811(H) * 508(V) Effective Pixels PAL=752(H) * 582(V) / NTSC=768(H) * 494(V) Lens 2.8~12mm DC Auto Iris Varifocal Scanning System... -
Page 38: Troubleshooting
Troubleshooting PROBLEM POSSIBLE CAUSE Check the power cable, power supply output and video Nothing appears on connection between camera and monitor. the screen. Is the camera lens or the lens glass dirty? Clean the lens / glass with a soft clean cloth. The image on the Adjust the monitor controls, as required. - Page 39 - MEMO - - 39 - True Day/Night Vandal Resistant Dome Camera...
- Page 40 GENIE CCTV LTD. CCTV House, City Park, Watchmead, Welwyn Garden City, Hertfordshire, AL7 ILT Tel: +44 (0) 1707 330541 Fax: +44 (0) 1707 330543 www.geniecctv.com Edition. GN-MARCH 2013...