Table of Contents
Advertisement
If your phone is activated, it will turn on, search for service, and begin the setup
process.
If your phone is not yet activated, see
Activation and Service
Before using your phone, you must set up your service with Virgin Mobile. You will need your
phone's serial number (MEID), printed on a sticker inside the battery compartment.
Create Your Account and Pick Your Plan
Set up your Virgin Mobile account.
1. From your computer, visit
2. Choose an activation option and click Next. Then enter your zip code and click Next.
3. When prompted, enter the serial number (MEID) printed on the sticker located on the
back of your phone in the battery compartment. This number can also be found on the
bottom panel of the phone's package.
4. Follow the remaining instructions to choose your plan and select a payment method.
5. Follow the activation instructions below and you'll be able to start using your phone.
Activate Your Phone
After setting up your account on virginmobileusa.com, simply turn your device on. Your device is
designed to activate automatically. If you are swapping from another Virgin Mobile device to a
new one, be sure to turn off the old device before swapping the serial number (MEID). Once the
MEID swap is complete, turn on the new device and the programming information will be
pushed to your device automatically.
You can also start the activation process manually.
■ Press
>
Manage Your Account
Access information about your account. You can:
●
Check your minutes.
●
Add money (Top-Up).
●
Changes plans.
●
And more!
Get Started
virginmobileusa.com
> Settings
> Activate this device.
Activate Your Phone
for more information.
and click Activate.
2
Advertisement
Table of Contents
