Table of Contents
Advertisement
IRRT Only on eSATA [Enabled]
[Disabled]
[Enabled]
Smart Response Technology [Enabled]
Allows you to enable or disable the Smart Response Technology.
Configuration options: [Disabled] [Enabled]
OROM UI Normal Delay [4 sec]
Allows you to select the delay time of the OROM UI Splash Screen in a normal status.
Configuration options: [2 sec] [4 sec] [6 sec] [8 sec]
RST Force Form [Disabled]
Allows you to enable or disable Form for Intel Rapid Storage Technology.
Configuration options: [Disabled] [Enabled]
SATA Port 1 / SATA Port 2 / SATA Port 3 / SATA Port 4 / SATA Port 5 /
SATA Port 6 / SATA Port 7 / SATA Port 8
Port 1 / Port 2 / Port 3 / Port 4 / Port 5 / Port 6 / Port 7 / Port 8 [Enabled]
Allows you to enable or disable the SATA port.
Configuration options: [Disabled] [Enabled]
Mechanical Presence Switch [Enabled]
Allows control of reporting if this port has a Mechanical Presence Switch.
Configuration options: [Disabled] [Enabled]
Spin Up Device [Disabled]
Selecting [Enabled] will start a COMERSET initialization sequence to the device on an
edge detect from 0 to 1.
Configuration options: [Disabled] [Enabled]
SATA Device Type [Hard Disk Drive]
Allows you to set whether the SATA port is connected to Solid State Drive or Hard Disk
Drive.
Configuration options: [Hard Disk Drive] [Solid State Drive]
Device Sleep [Disabled]
Allows you to enable or disable the mSata for RTD3.
Conifguration Options: [Disabled] [Enabled]
SATA DEVSLEP Idle Timeout Config [Disabled]
Allows you to enable or disable SATA DTIO Config.
Configuration options: [Disabled] [Enabled]
4-34
Any RAID volume can span internal and eSATA drives.
Only IRRT volumes can span internal and eSATA drives.
Chapter 4: BIOS Setup
Advertisement
Table of Contents
