Lenovo Y25g-30 User Manual page 20

7
8
7
+
8
Using the On-Screen Display(OSD) controls
To adjust the settings, the user controls can be viewed through the OSD.
To use the controls:
1. Press
2. Use
3. Press
2-4 Y25g-30 Flat Panel Monitor User's Guide
(No menu on the screen)
Volume Up
(Volume page in the main menu)
(No menu on the screen)
Volume Down
(Volume page in the main menu)
The compound keys are as shown below
Volume Mute
(Hold down simultaneously for 2
seconds under any situation)
i
Model
Firmware
Format
R a n g e
EOTF
OD Active
Mouse
DP (1.4)
to open the main OSD menu.
or to move among the icons. Select an icon and press
function. If there is a sub-menu, you can move between options using
press to select that function. Use
to move backwards through the sub-menus and exit from the OSD.
Volume Quickly enters the Volume adjustment
Increases the volume (and releases Mute
Volume Quickly enters the Volume adjustment
Decreases the volume (and releases Mute
Holding them down simultaneously for 2
(Before the 2 seconds, it will first trigger
Normal Mode 1920 x 1080
Y25g-30
L1.0
8bpc RGB4444-sRGB
Full l
SDR-sRGB
OSD on; OD Active
Analyzer Inactive
or to make adjustments then press
page
state)
page
state)
seconds will trigger Mute volume
the behavior of opening the page for
volume adjustment)
@60Hz
to access that
or , then
to save.