Removing The Oven Relay & Power Pcb - LG LSGL6337F Service Manual

REMOVING THE OVEN RELAY & POWER PCB
WARNING
• DISCONNECT power supply cord
from the outlet before servicing.
• Replace all panels and parts before
operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal
injury, death or electrical shock.
CAUTION
• Be careful when you work on the
gas range handling the sheet metal
part.
- Sharp edge may be present and you can cut
yourself.
1. Turn off the electrical supply and gas supply going
to the range.
2. Pull the range away from the wall so that you can
access the rear panel.
3. Remove the back cover (See step 3 on page 3-2)
Copyright © LG Electronics Inc. All rights reserved.
Only training and service purposes
COMPONENT ACCESS
Oven Relay &
Power PCB
4. To remove the PCB, Disconnect the 7ea housing
and remove the 2ea screw.
Screw
3-3
Screw