Screen Saver; System Select - Optional; Displaying File Information (Id3 Tag ); Radio Operations - LG DH3120S-A2 Owner's Manual

24 Operating

Screen Saver

The screen saver appears when you leave the unit
in stop mode for about five minutes.

System Select - Optional

You must select the appropriate system mode for
your TV system. If "NO DISC" appears in the display
window, press and hold PAUSE/STEP (M) for more
than five seconds to select a system.
Displaying file information
(ID3 TAG )
While playing an MP3 file containing file
information, you can display the information by
pressing DISPLAY.
4
DH3120S-A2.DPERLLW_ENG_0931.indd 24

Radio Operations

Be sure that both FM/AM aerials are connected.
(Refer to the page 15)

Listening to the Radio

1. Press FUNCTION until FM/AM appears in the
display window.
The last received station is tuned in.
2. Press and hold TUN.(-/+) for about two seconds
until the frequency indication starts to change,
then release. Scanning stops when the unit
tunes in a station.
or
Press TUN.(-/+) repeatedly.
3. Adjust the volume by rotating VOL. on the front
panel or by pressing VOL + or - on the remote
control repeatedly.

Presetting the Radio Stations

You can preset 50 stations for FM/AM.
Before tuning, make sure that you have turned
down the volume.
1. Press FUNCTION until FM/AM appears in the
display window.
2. Select the desired frequency by using TUN.
(-/+).
3. Press PROG./MEMO. a preset number will flash
in the display window.
4. Press PRESET (WS) to select the preset
number you want.
5. Press PROG./MEMO.
The station is stored.
6. Repeat the steps 2 to 5 to store other stations.

Deleting all the saved stations

1. Press and hold PROG./MEMO. for two seconds.
"ERASE ALL" will flash up on the unit display.
2. Press PROG./MEMO. to erase all of the saved
radio stations.

Improving poor FM reception

Press PLAY (d) (MO./ST.) on the remote control.
This will change the tuner from stereo to mono and
usually improve the reception.
2013-04-09 1:10:54