Advertisement
12. SCHEMATIC DIAGRAM
13. PRINTED CIRCUIT BOARD
14. BLOCK DIAGRAM
15. WIRING CONNECTION DIAGRAM
16. REPLACEMENT PARTS LIST
Notes:
*Important safety notice:
Components identified by
mark have special characteristics important for safety.
Furthermore, special parts which have purposes of fire-retardant (resistors), high-quality sound
(capacitors), low-noise (resistors), etc. are used.
When replacing any of components, be sure to use only manufacture's specified parts shown in
the parts list.
*Warning: This product uses a laser diode. Refer to caution statements.
*ACHTUNG: Die lasereinheit nicht zerlegen. Die lasereinheit darf nur gegen einc vom hersteller
spezifizierte einheit ausgetauscht werden.
*Capacity values are in microfarads (uF) unless specified otherwise. P=Pico-farads (pF), F=farads
(F)
*Resistance values are in ohms, unless specified otherwise. 1K=1,000 (OHM), 1M=1,000K (OHM)
*The marking <RTL> indicates that the Retention Time is limited for this item. After the
discontinuation of this assembly in production, the item will continue to be available for a
specific period of time. The retentionperiod of availability is dependant on the type of assembly,
and in accordance with the laws governing part and product retention. After the end of this
period, the assembly will no longer be available.
*"<IA>"-"<IH>" marks in Remarks indicate languages of instruction manuals. [<IA>: Dansk, <IB>:
English, <IC>: English, <ID>:French, <IE>: Germany, <IF>: Italiano, <IG> : Espanol, <IH>:
Nederlands]
*MAIN, CPL, CPR, JACK2, INVL, JACK, AS, ASUB, ACP, PKB, MKB1 and MKB2 in Remarks
indicate the Circuits and P. C. B.s. If the same Ref. No. is found in the replacement parts list,
check those indications in the Remarks.
27
Advertisement
