Advertisement
7.4. Removing the keyboard assembly
1. Remove the control panel (see step
2. Remove the keyboard assembly mounting screws located on the
bottom of the cabinet (A x 10 pcs.) as shown in
7.5. Key(s)
Disassembly
1. Remove the keyboard assembly (see step
keyboard assembly
2. While inserting a thin plate to press down a claw, push the rear of
the key forward to disengage the key claw from the chassis.
3. Lift the key up to remove it.
Note:
- The key claw is easily broken. Do not apply undue force. Should a
key claw break, it can still be used.
- If a black key is to be replaced, it is necessary to remove both
adjacent white keys.
Figure-11
").
Figure-12
10
"Removing the control panel
Figure-11
"Removing the
).
.
Advertisement
