Dioptric Adjustment Lever - Canon HR10 Instruction Manual
Canon hd camcorder
Hide thumbs
Also See for HR10:
- Instruction manual (152 pages) ,
- Software manual (60 pages) ,
- Brochure (2 pages)
Table of Contents
Advertisement
Pressing _
willnot start
Setthe camcorder to _;
mode.
35
recording.
Load a recommended disc.
The disc isfull (" _, END" appears on the screen). Delete some recordings
43
(DVD-RW in HD quality, or SD quality (VRmode)) to free some space or
replace the disc.
The camcorder has exceeded its operational temperature. Turn off the
camcorder and let it cool down before resuming use,
Remove the disc protection.
66
Unfinalize the disc (DVD-RW in HD quality, or SD quality (VIDEO mode)).
71
Even after stopping recording, the
The scene is being recorded on the disc. This is not a malfunction.
35
DISC access indicator does not go off,
The point where _
was
There isa slight interval between pressing _
and the actual start
pressed does not match the
of recording on the disc. This is not a malfunction.
beginning/end of the recording.
The recording suddenly stops shortly
The disc is dirty. Clean the disc with a soft lens-cleaning cloth. If the
111
after starting recording,
problem persists replace the disc.
The camcorder has exceeded its operational temperature. Turn off the
camcorder and let it cool down before resuming use,
Camcorder will not focus.
Autofocus does not work on the subject. Focus manually.
59
Adjust the viewfinder with the dioptric adjustment lever.
36
Lens is dirty. Clean the lens with a soft lens-cleaning cloth. Never use
113
tissue paper to clean the lens.
Sound is distorted.
When recording near loud sounds (such as fireworks or concerts), sound
may become distorted. This is not a malfunction.
Viewfinder picture is blurred.
Adjust the viewfinder with the dioptric adjustment lever.
36
Playback/Editing
Pressing the playback button does
Load a disc.
32
not start playback.
Set the camcorder to _
mode.
41
Do not insert into the camcorder discs that were initialized, recorded or
edited using another DVD device.
If using a single-sided disc, check that the disc is inserted with the label
32
side facing up,
The camcorder has exceeded its operational temperature. Turn off the
camcorder and let it cool down before resuming use,
• During playback there is video
The disc is dirty. Clean the disc with a soft lens-cleaning cloth.
111
noise and the sound is distorted.
Do not insert into the camcorder discs that were initialized, recorded or
• The disc cannot be read.
edited using another DVD device.
103
Advertisement
Table of Contents
